|
|
|||||||||
Electrical Machines & Power
Electronics (EMPE) Laboratory
at Texas A&M University |
|||||||||
|
The following is a list of lectures and short
courses presented by Prof. Hamid A. Toliyat: 1. Keynote Speaker, JMAG User Conference, Detroit, Oct. 16, 2012, “Magnetic Gears”. 2. Invited seminar, University of Texas – San Antonio, Oct.
28, 2011, “Soft Switched High-Frequency Link dc/ac Converters for Subsea
Applications”. 3. Invited seminar, POSCO, Seoul, Korea, Aug. 19, 2011, “New
Power Converters for Battery Energy Storage”. 4. Invited seminar, Samsung Advanced Research Institute of
Technology (SAIT), Seoul, Korea, Aug. 18, 2011, “Recent Advances in Electric
Machines and Power Electronics at EMPE Lab”. 5. Invited seminar, Korea Railroad Research Center (KRRI),
Seoul, Korea, Aug. 18, 2011, “Recent Advances in Electric Machines and Power
Electronics at EMPE Lab”. 6. Invited seminar, LGC R&D Center, Seoul, Korea, Aug.
17, 2011, “Electric Motors for Electric and Hybrid Electric Vehicles”. 7. Invited seminar, LG Electronics, Seoul, Korea, Aug. 17,
2011, “Electric Motors and Power Converters for Electric Vehicles”. 8. Invited seminar, Hanyang
University, Seoul, Korea, Aug. 16, 2011, “Recent Advances in Electric
Machines and Power Electronics at EMPE Lab”. 9. Invited seminar, Hyundai Motor Co., Seoul, Korea, Aug. 16,
2011, “Recent Advances in Electric Machines and Power Electronics at EMPE
Lab”. 10. Invited seminar, Rensselaer Polytechnic Institute, Troy, NY,
Sep. 23, 2010, “Condition Monitoring and Fault Diagnosis of Electric
Machines”. 11. Invited seminar, GE Global Research Center, Niskayuna, NY,
Sep 24, 2010, “High Frequency Power Converters”. 12. Invited Tutorial, IEEE 2010 Energy Conversion Conference and
Exposition (ECCE’10), Atlanta, GA, Sep. 12, 2010, “Design and Control of
Permanent Magnet Machines for Geared and Gearless Applications”. 13. Invited seminar, Solar Turbines, San Diego, CA, Aug. 20,
2010, “Electric Machines and Power Electronics Review”. 14. Distinguished speaker, University of Texas – Arlington,
March. 31, 2010, “Condition Monitoring and Fault Diagnosis of Electric
Machines”. 15. Invited seminar, General Electric Technology Center,
Bangalore, India, March 8, 2010, “Recent Advances in Electric Machines
Technologies”. 16. Invited seminar, National Cheng Kung University, Tainan,
Taiwan, Feb. 5, 2010, “A Novel Soft-Switched AC Link Converter”. 17. Invited seminar, National Tshing Hua University, Hsinchu,
Taiwan, Feb. 4, 2010, “Permanent Magnet Synchronous reluctance Machines”. 18. Invited seminar, National Central University, Taoyuan, Taiwan, Feb. 3, 2010, “Fault Diagnosis and
Condition Monitoring of Electric Machines”. 19. Invited seminar, PSERC, “Recent Advances in Electric Energy
Conversion and Storage,” Sep. 1, 2009. 20. Invited seminar, Northeastern University, Boston, MA, May
26, 2009, “Energy Conversions, Transmissions, and Storage”. 21. Panelist, IEEE-IECON’08, Nov. 10-13, 2008, Orlando, FL,
“Recent Advances and Applications of Power Electronics and Motor Drives”. 22. Keynote speaker, International Conference in Electric Machines and Systems (ICEMS’08),
Oct. 17-19, 2008, Wuhan, China. 23. Invited seminar, Tsinghu
University, Beijing, China, Oct. 15, 2008, “Advanced Electric Machines and
Power Electronics Lab at TAMU”. 24. Invited seminar, Ferdowsi
University, Mashhad, Iran, June 1, 2008, “Advances in Power Electronics and
Electric Machines”. 25. Invited seminar, San Diego State University, San Diego, CA,
April 15, 2008, “Recent Advances in Electric Machines and Power Electronics”. 26. Invited seminar, General Atomics, San Diego, CA, April 14,
2008, “Recent Advances in Electric Machines and Power Electronics”. 27. Invited seminar, University of Denver, Denver, CO, April
7-8, 2008, “Recent Advances in Electric Machines and Power Electronics”. 28. Invited seminar, North Carolina University, Raleigh, NC,
March 27, 2008, “Recent Advances in Electric Machines and Power Electronics”. 29. Invited seminar, Northeastern University, Boston, MA, March
19, 2008, “Recent Advances in Electric Machines and Power Electronics”. 30. Invited seminar at RDECOM Power & Energy IPT, Tactical
Electronics and Rotating Machinery Workshop, 23-24 January 2008, “Feasibility
Study of Novel Permanent Magnet Assisted Synchronous Reluctance Generators (PMa-SynRG)”. 31. Invited seminar at TECO-Westinghouse, Round Rock, TX,
November 20, 2007, “Research Activities at EMPE Lab”. 32. Invited seminar at European Airspace and Defense Systems
(EADS), Munich, Germany, May 25, 2007, “Fault Tolerant Motor Drives”, Munich,
Germany. 33. Invited tutorial at PCIM’07, Nuremberg, Germany, May 21, 2007, “Condition Monitoring, Fault Diagnosis, and
Fault Tolerant Electric Motor Drives”. 34. Invited seminar at Black & Decker Company, Baltimore,
MD, May 14, 2007, “Design and Performance Improvement of Electromechanical
Devices”. 35. Invited seminar at United Technology Research Center (UTRC),
Hartford, Connecticut, March 14, 2007, “Recent Advances in Modern Electric
Machines and Power Electronics Converters”. 36. Invited short course presented at the Army Research Lab
(TARDEC), Jan. 10, 2007, Detroit, MI, “Vehicle Electric Power Generation and
Distribution”. 37. Invited seminar, King Mongkut
Institute of Technology at Ladkrabang, Bangkok,
Thailand, Dec. 15, 2006, “Recent Advances in Modern
Electric Machines and Power Electronics Converters”. 38. Invited seminar, Chiang Mai University, Chiang Mai,
Thailand, Dec. 13, 2006, “Research Activities at Advanced Electric Machines
& Power Electronics Laboratory of Texas A&M University”. 39. Keynote Speaker, Ansoft Leading Insight – Application
Workshops for High-Performance Design, Detroit, Oct. 24, 2006. 40. Invited seminar, Air Force Research Lab, Albuquerque, NM,
July 25, 2006, “Flywheel Energy Storage Systems, Condition Monitoring, Fault
Diagnosis, and Fault Tolerant Electric Drives”. 41. Invited seminar, Drexel University, Philadelphia, PA, April
13, 2006, “Recent Advances in Power Electronics and Motor Drives”. 42. Invited seminar, Federal University of Rio de Janeiro, Rio
de Janeiro, Brazil, April 1, 2006, “Flywheel Energy Storage Systems”. 43. Invited seminar, Federal University of Santa Catarina, Florianopolis, Brazil, March 30, 2006,
“Flywheel Energy Storage Systems”. 44. Invited short course, WEG Industries, Jaragua
del Sol, Brazil, March 28, 2006, “Permanent Magnet Assisted Synchronous
Reluctance Motors for Low Cost Applications”. 45. Invited seminar, WEG Industries, Jaragua
del Sol, Brazil, March 27, 2006, “Flywheel Energy Storage Systems, for
Land/Sea/Space Applications”. 46. Invited seminar, Oregon State University, Corvallis, OR,
March 17, 2006, “Flywheel Energy Storage Systems”. 47. Invited short course presented at the Army Research Lab
(TARDEC), Jan. 9, 2006, Detroit, MI, “Flywheel Energy Storage Systems, for Land/Sea/Space
Applications”. 48. Invited seminar, Universidad de Concepcion, Concepcion,
Chile, Nov. 24-25, 2005, “Permanent Magnet Assisted Synchronous reluctance
Motor Design and Performance Improvement” and “Design and Analysis of
Three-Phase AC/AC Power Converters for AC Drives and Utility Interface”. 49. Invited seminar, Universidad Tecnica
Federico Santa Maria, Valparaiso, Chile, Nov. 28, 2005, “Recent Advances in
Electric Machines & Power Converters in Advanced Electric Machines &
Power Electronics Laboratory”. 50. Invited seminar, University of Tehran, Tehran, Iran, Dec. 7,
2004, “Fault Tolerant Motor Drives for Hybrid Electric Vehicle Applications”. 51. Invited seminar, Power System Conference (PSC’04), Tehran,
Iran, Nov. 22-24, 2004, “Recent Advances in Wind Power Generations”. 52. Invited lecture, LG Electronics, Home Appliance Research
Laboratory, Seoul, Korea. Oct. 22, 2004, “Wind Power Generators and
Converters”. 53. Invited lecture, Korea University, Seoul, Korea, Oct. 22,
2004, “Fault Diagnosis of Electric Machines”. 54. Invited lecture, Chungbuk
University, Cheongju, Korea, Oct. 21, 2004, “Fault
Diagnosis of Electric Machines”. 55. Invited lecture, Pohang Technical University, Pohang, Korea,
Oct. 19, 2004, “Fault Diagnosis and Fault Tolerant Electric Motor Drives”. 56. Invited lecture, Pusan National University, Busan, Korea, Oct. 19, 2004, “Fault Diagnosis of Electric
Machines”. 57. Invited short course presented at 2004 International
Conference on Power Electronics (ICPE’04), Oct. 18-22, Busan,
Korea, “Fault Diagnosis and Fault Tolerant Electric Motor Drives”. 58. Invited lecture, Illinois Institute of Technology, April 30,
2004, Chicago, IL, “A Novel Integrated Alternator/Active Filter for Wind
Power Applications”. 59. Invited lecture, University of Missouri-Rolla, April 28,
2004, Rolla, MO, “Fault Tolerant Matrix Converters”. 60. Invited short course presented at the Army Research Lab
(TARDEC), Jan. 14, 2004, Detroit, MI, “Reconfigurable Motor Drives and Power
Electronics Based Architectures for Military Vehicles”. 61. Invited short course presented at the IEEE-IECON’03,
November 2-6, 2003, Roanoke, VA, “Applications of Power Electronics in
Automotive Industry: State of the Art and Future Possibilities”. 62. Invited lecture, Hyundai Motor Company, Advanced Technology
Center, Seoul, Korea, July 16, 2003. 63. Invited lecture, LG Electronics, Home Appliance Research
Laboratory, Seoul Korea. July 15, 2003. 64. Invited lecture, Samsung Electronics, Digital Appliance
Research Laboratory, Seoul, Korea, July 16, 2003. 65. Invited short course, Korean Agency for Technology and
Standards (ATS), Seoul, Korea, July 14, 2003. 66. Invited lecture, Korea Electronics Technology Institute
(KETI), Seoul, Korea, July 14, 2003. 67. Invited lecture, Korea Electric Research Institute (KERI),
Seoul, Korea, July 18, 2003. 68. Invited short course presented at the IEEE-APEC’03, February
9-13, 2003, Miami Beach, FL, “Synthesis of Advanced Control Methodologies for
High Grade Adjustable Speed Motor Drives: Theory and Applications”. 69. Invited short course presented at the Army Research Lab
(TARDEC), Dec. 5, 2002, Detroit, MI, “Condition Monitoring and Fault
Diagnosis of Electric Machines and Fault Tolerant Electric Machinery”. 70. Invited short course presented at the IEEE-IECON’02,
November 5-8, 2002, Seville, Spain, “Integration of Advanced Motion Control
Devices in automotive Products: Design in the Context of the Application. 71. Invited short course presented at the IEEE-IAS, October
13-17, 2002, Pittsburgh, PA, “Selection, Design, and Control of Adjustable
Speed Motor Drives for Stressful & Fault Tolerant Applications”. 72. Invited short course presented at the IEEE Applied Power
Electronics Conference and Exposition, March 10-14, 2002, Dallas, TX, “Sensorless Control of Adjustable Speed Motor Drives: State of the Art and Recent Advances” 73. Invited short course at Copeland Corporation, Sidney, OH,
November 2, 2001, “Fault Diagnosis of Electric Machines”. 74. Invited short course presented at the IEEE Applied Power Electronics
Conference and Exposition, March 4-8, 2001, Anaheim, CA, “Current Intensive
Motor Drives: A New Challenge in Automotive Applications” 75. Invited Tutorial at 2nd International Conference on Power Electronics
Drives and Energy Systems for Industrial Growth, IEEE-PEDES’98, Perth,
Australia, 1-3 Dec., “Condition Monitoring and Fault Diagnosis of Electric
Machines & Transformers”. 76. Invited Seminar at Small Motors & Motion Association,
Nashville, TN, Nov. 12, 1998, “Adjustable Speed AC Motor Drives: Application
Problems and Solutions”. 77. Invited short course at Reliance Electric, Cleveland, OH,
March 27, 1997, “Fault Diagnosis of Electric Machines”. 78. Invited short course at Whirlpool Co, Benton Harbor, MI,
Dec. 5-6, 1996, “Permanent Magnet Motors”. 79. Invited short course at Texas Instruments INC., Dallas, TX,
Jan. 26, 1996, “Switched Reluctance Motor Drives”. 80. Invited short course at LeTourneau
Inc., Longview, TX, Jan. 12, 1996, “Design and Control of Switched Reluctance
Motors”. 81. Invited short course at General Motors Mesa Desert Proving
Ground, Phoenix, AZ, Oct. 27, 1995, “Electric Drives for Electric and Hybrid
Vehicles”. 82. Invited short course at General Motors Milford Proving
Ground, Detroit, MI, Sep. 8, 1995, “Electric Drives for Electric and Hybrid
Vehicles”. 83. Invited short course at IEEE Applied Power Electronics
Conference and Exposition, March 4, 1995, Dallas, “Electric Drives for
Electric and Hybrid Vehicles”. 84. Invited Speaker at IEEE Industry Applications Society,
Dallas Section, "Power electronics and Electric Machines-A Technology
Review, Feb. 21, 1995. |
|
|