Education

Professional Interests

Honors/Awards

Patent Disclosures

Books

Lectures and Short Courses

Journal Papers

Conference Papers

Graduate Students Supervised or under Supervision

Visiting Scholars

Professional Committee Memberships

 

  • Hamid A. Toliyat
  • Raytheon Endowed Professor
  • Director of Electric Power and Power Electronics Institute
  • IEEE Fellow 
  • Professional Engineer in the State of Texas 
  • Office: 216Q Zachry Engineering Center 
  • Office Phone Number: (979) 862-3034 
  • FAX Number: (979) 845-6259

·         Books:

              DSP-Based Electromechanical Motion Control, CRC Press, 2003.

 

              Handbook of Electric Motors, Marcel Dekker, New York, 2004.

 



Education:

·                    Ph.D., University of Wisconsin-Madison, May 1991

·                    MS, Electrical Engineering, West Virginia University, May 1986

·                    BS, Electrical Engineering, Sharif University of Technology, Iran, May 1982

 

Back to top

Professional Interests:

1.              Distributed Energy Systems; Wind Mills, Microturbine, Solar

2.              Electromechanical energy storage batteries

3.              Fuel cell operated electric motor drives

4.              Auxiliary power generators

5.              Power converters for electric machines including multi-levels

6.              Uninterruptible power supplies (UPS)

7.              Sensors and Sensorless electric motor drive and spindle motors

8.              DSP-based power electronics systems

9.              Novel electric machines for different applications

10.          Simulation techniques such as finite elements analysis and Pspice and Saber.

11.          Condition monitoring and fault diagnosis of electric machinery

12.          Electric and Hybrid Electric Vehicles

13.          Active power filters for power systems network

14.          Consulting in related fields and serving as an expert witness

Back to top

Honors/Awards:

1.              Best Paper Second Prize Award, IEEE Industrial Electronics Society, Electrical Machine Technical Committee, IECON 2008.

2.              IEEE Fellow for “Contributions to the Design, Analysis and Control of Multi-Phase Fault Tolerant Electric Machines”.

3.             Raytheon Endowed Professor

4.              Prize Paper Award, IEEE Power Engineering Society (PES), 2007.

IMG_0083

Dr. Hamid Toliyat, professor of Electrical & Computer Engineering at Texas A&M University, received the 2007 IEEE Power Engineering Society Best Transactions Paper Award from Mr. John McDonald IEEE-PES President.

 

5.              IEEE Industry Applications Society Executive Board, Member, 2008-present.

6.              Prize Paper Award, IEEE Power Engineering Electric Machinery Committee, 2007.

7.              Patent and Innovation Award, Texas A&M University System Office of Technology Commercialization’s, 2007.

8.              TEES Fellow Award, Texas Engineering Experiment Station (TEES), $5000.0 prize award, Fall 2006.

9.              Third Prize Transactions Paper Award, IEEE Industry Applications Society, 2006.

10.          Professional Engineer, State of Texas, P.E. # 97974.

11.          Chair, Industrial Power Conversion Systems Department of IEEE Industry Applications Society, 2007-Present.

12.          Outstanding Professor Award, Department of Electrical and Computer Engineering, Texas A&M University, $5000.0 prize award, Fall 2005.

13.          Cyrill Veinott Electromechanical Energy Conversion Award, IEEE Power Engineering Society, $5000 prize award, 2004.

Dr. Hamid Toliyat, professor for the Department of Electrical Engineering at Texas A&M, received the 2004 Cyril Veinott Award, an Institute of Electrical and Electronics Engineers (IEEE) Power Engineering Society (PES) award.  Mr. John McDonald IEEE-PES President presented Prof. Toliyat the award.  The Cyril Veinott Award is given for outstanding contributions to the field of electromechanical energy conversion. Candidates are nominated for consideration by peers. Prof. Toliyat received a plaque, a $5000 honorarium, and recognition at the recent IEEE-IEMDC’05. Selection criteria includes: career dedication to the electric power engineering profession and career contributions to the development, design, analysis, or manufacturing of electromechanical energy conversion systems or devices.

 

14.          General Chair, International Electric Machines and Drives Conference (IEEE-IEMDC’05), May 15-18, 2005, San Antonio, Texas.

15.          TEES Fellow Award, Texas Engineering Experiment Station (TEES), $5000.0 prize award, Fall 2004.

16.          Listed in Marquis Who’sWho is the World, 24th Edition, 2007.

17.          Editor, IEEE Transactions on Energy Conversion.

18.          Distinguished Achievement Award, in recognition of distinguished achievements in teaching, Association of Former Students, Texas A&M University, Fall 2003, $2000 prize award.

19.          Associate Editor, IEEE Transactions on Power Electronics.

20.          E.D. Brockett Professorship Award, Texas Engineering Experiment Station (TEES), $4000.0 prize award, 2002-2003.

21.          Appeared on People’s Agenda talk show of KERA 90.1 Dallas/Fort Worth/Denton on “Fuel Cell Research and other Aspects of Automotive Research,” January 7, 2003, 10:00 AM-11:00 AM.

22.          Member of Editorial Board, Electric Power Components and Systems Journal.

23.          Member of Editorial Board, Journal of Electrical Engineering – Romania.

24.          Schlumberger Foundation Technical Awards, $25,000 prize award, April 2001.

25.          Eugene E. Webb’43 Faculty Fellow Award, Texas Engineering Experiment Station (TEES), , $5000.0 prize award, for “Overall contribution to the Engineering Program including classroom instruction, scholarly activities and professional service”, 2000-2001.

26.          Select Young Investigator Award, Texas Engineering Experiment Station (TEES), $5000.0 stipend, 1999.

27.          Schlumberger Foundation Technical Awards, $30,000.0 prize award, April 2000.

28.          Space Act Award by NASA Inventions and Contributions Board, $250.0 prize award, April 1999.

29.          Prize Paper Award, Electric Machinery Committee of the IEEE Power Engineering Society, Best Transactions paper, 1996.

30.          Listed in Marquis Who’s Who in American Education, 6th Edition.

31.          Member of ASEE, Nov. 1999.

32.          Listed in Marquis Who’s Who in Science and Engineering, 5th Edition.

33.          Listed in Marquis Who’s Who in Science and Engineering, 4th Edition.

Back to top

Patents and Disclosures:

1.              Multiphase Induction Motor Drive System and Method, H.A. Toliyat, R. Shi, H. Xu, United States Patent No.: 6,426,605 B1, July 30, 2002.

2.              A Low-Cost Brushless DC Motor Drive with Improved Power Factor, H.A. Toliyat, and T. Gopalarathnam, United States Patent No.: 7,049,786, May 23, 2006.

3.              System, Apparatus and Method for Driving a Permanent Magnet Motor, H.A. Toliyat, R. Khopkar, S.M. Madani, M. Hajiaghajani, TAMUS 2143, May 2004, U.S. Provisional Patent Application Serial No 60/575,928.

4.              Permanent Magnet Motor Full Speed Range Control Method and Apparatus, H.A. Toliyat, L. Hao, and L. Parsa, TAMUS 1984, January 2003, U.S. Provisional Patent Application Serial No. 60/542,770, Filing Date: February 6, 2004.

5.              Condition Monitoring and Fault Diagnosis of Electric Motors and Generators Apparatus and Methods, H.A. Toliyat, and B. Akin, TAMUS 2495, Feb. 22, 2007.

6.              An Integrated Alternator/Active Filter for Wind Power Applications, H.A. Toliyat, M.T. Abolhassani, TAMUS2376, April 2006.

7.              Current Source Inverter with Simple Commutation Method and Apparatus, H.A. Toliyat, and S. Kwak, TAMUS 2130, April 2004.

8.              Fault Tolerant Permanent Magnet Motor Drives with High Specific Torque, H.A. Toliyat, L. Parsa, 2093TEES04, November 2003.

9.              A Multiphase Synchronous Reluctance Motor Drive with High Specific Torque, H.A. Toliyat, and R. Shi, TAMUS 1589, April 2000.

10.          A Four-quadrant Soft-switched Brushless Permanent Magnet Motor Drive and Method, H.A. Toliyat, J.C. Moreira, S. Waikar, and M.S. Arefeen, TAMUS 1567, March 2000.

Back to top

  Books:

·                     DSP-Based Electromechanical Motion Control, CRC Press, Florida, 2003, 344 pages.

·                     Handbook of Electric Motors, 2nd Edition, Marcel Dekker, New York, 2004, 805 pages.

·                     Contributor to “The Power Electronics Handbook”, Timothyl L. Skvarenina, editor-in-chief, CRC Press, 2002.

·                     Contributor to “Comprehensive Dictionary of Electrical Engineering”, Phillip Laplante, editor-in-chief, CRC Press, 1999.

Back to top

  Lectures and Short Courses:

1.              Invited seminar, PSERC, “Recent Advances in Electric Energy Conversion and Storage,” Sep. 1, 2009.

2.              Invited seminar, Northeastern University, Boston, MA, May 26, 2009, “Energy Conversions, Transmissions, and Storage”.

3.              Panelist, IEEE-IECON’08, Nov. 10-13, 2008, Orlando, FL, “Recent Advances and Applications of Power Electronics and Motor Drives”.

4.              Keynote speaker, International Conference in Electric Machines and Systems (ICEMS’08), Oct. 17-19, 2008, Wuhan, China.

5.              Invited seminar, Tsinghu University, Beijing, China, Oct. 15, 2008, “Advanced Electric Machines and Power Electronics Lab at TAMU”.

6.              Invited seminar, Ferdowsi University, Mashhad, Iran, June 1, 2008, “Advances in Power Electronics and Electric Machines”.

7.              Invited seminar, San Diego State University, San Diego, CA, April 15, 2008, “Recent Advances in Electric Machines and Power Electronics”.

8.              Invited seminar, General Atomics, San Diego, CA, April 14, 2008, “Recent Advances in Electric Machines and Power Electronics”.

9.              Invited seminar, University of Denver, Denver, CO, April 7-8, 2008, “Recent Advances in Electric Machines and Power Electronics”.

10.          Invited seminar, North Carolina University, Raleigh, NC, March 27, 2008, “Recent Advances in Electric Machines and Power Electronics”.

11.          Invited seminar, Northeastern University, Boston, MA, March 19, 2008, “Recent Advances in Electric Machines and Power Electronics”.

12.          Invited seminar at TECO-Westinghouse, Round Rock, TX, November 20, 2007, “Research Activities at EMPE Lab”.

13.          Invited seminar at RDECOM Power & Energy IPT, Tactical Electronics and Rotating Machinery Workshop, 23-24 January 2008, “Feasibility Study of Novel Permanent Magnet Assisted Synchronous Reluctance Generators (PMa-SynRG)”.

14.          Invited seminar at European Airspace and Defense Systems (EADS), Munich, Germany, May 25, 2007, “Fault Tolerant Motor Drives”, Munich, Germany.

15.          Invited tutorial at PCIM’07, Nuremberg, Germany, May 21, 2007, “Condition Monitoring, Fault Diagnosis, and Fault Tolerant Electric Motor Drives”.

16.          Invited seminar at Black & Decker Company, Baltimore, MD, May 14, 2007, “Design and Performance Improvement of Electromechanical Devices”.

17.          Invited seminar at United Technology Research Center (UTRC), Hartford, Connecticut, March 14, 2007, “Recent Advances in Modern Electric Machines and Power Electronics Converters”.

18.          Invited short course presented at the Army Research Lab (TARDEC), Jan. 10, 2007, Detroit, MI, “Vehicle Electric Power Generation and Distribution”.

19.          Invited seminar, King Mongkut Institute of Technology at Ladkrabang, Bangkok, Thailand, Dec. 15, 2006, “Recent Advances in Modern Electric Machines and Power Electronics Converters”.

20.          Invited seminar, Chiang Mai University, Chiang Mai, Thailand, Dec. 13, 2006, “Research Activities at Advanced Electric Machines & Power Electronics Laboratory of Texas A&M University”.

21.          Keynote Address, Ansoft Leading Insight – Application Workshops for High-Performance Design, Detroit, Oct. 24, 2006.

22.          Invited seminar, Air Force Research Lab, Albuquerque, NM, July 25, 2006, “Flywheel Energy Storage Systems, Condition Monitoring, Fault Diagnosis, and Fault Tolerant Electric Drives”.

23.          Invited seminar, Drexel University, Philadelphia, PA, April 13, 2006, “Recent Advances in Power Electronics and Motor Drives”.

24.          Invited seminar, Federal University of Rio de Janeiro, Rio de Janeiro, Brazil, April 1, 2006, “Flywheel Energy Storage Systems”.

25.          Invited seminar, Federal University of Santa Catarina, Florianopolis, Brazil, March 30, 2006, “Flywheel Energy Storage Systems”.

26.          Invited short course, WEG Industries, Jaragua del Sol, Brazil, March 28, 2006, “Permanent Magnet Assisted Synchronous Reluctance Motors for Low Cost Applications”.

27.          Invited seminar, WEG Industries, Jaragua del Sol, Brazil, March 27, 2006, “Flywheel Energy Storage Systems, for Land/Sea/Space Applications”.

28.          Invited seminar, Oregon State University, Corvallis, OR, March 17, 2006, “Flywheel Energy Storage Systems”.

29.          Invited short course presented at the Army Research Lab (TARDEC), Jan. 9, 2006, Detroit, MI, “Flywheel Energy Storage Systems, for Land/Sea/Space Applications”.

30.          Invited seminar, Universidad de Concepcion, Concepcion, Chile, Nov. 24-25, 2005, “Permanent Magnet Assisted Synchronous reluctance Motor Design and Performance Improvement” and “Design and Analysis of Three-Phase AC/AC Power Converters for AC Drives and Utility Interface”.

31.          Invited seminar, Universidad Tecnica Federico Santa Maria, Valparaiso, Chile, Nov. 28, 2005, “Recent Advances in Electric Machines & Power Converters in Advanced Electric Machines & Power Electronics Laboratory”.

32.          Invited seminar, University of Tehran, Tehran, Iran, Dec. 7, 2004, “Fault Tolerant Motor Drives for Hybrid Electric Vehicle Applications”.

33.          Invited seminar, Power System Conference (PSC’04), Tehran, Iran, Nov. 22-24, 2004, “Recent Advances in Wind Power Generations”.

34.          Invited lecture, LG Electronics, Home Appliance Research Laboratory, Seoul, Korea. Oct. 22, 2004, “Wind Power Generators and Converters”.

35.          Invited lecture, Korea University, Seoul, Korea, Oct. 22, 2004, “Fault Diagnosis of Electric Machines”.

36.          Invited lecture, Chungbuk University, Cheongju, Korea, Oct. 21, 2004, “Fault Diagnosis of Electric Machines”.

37.          Invited lecture, Pohang Technical University, Pohang, Korea, Oct. 19, 2004, “Fault Diagnosis and Fault Tolerant Electric Motor Drives”.

38.          Invited lecture, Pusan National University, Busan, Korea, Oct. 19, 2004, “Fault Diagnosis of Electric Machines”.

39.          Invited short course presented at 2004 International Conference on Power Electronics (ICPE’04), Oct. 18-22, Busan, Korea, “Fault Diagnosis and Fault Tolerant Electric Motor Drives”.

40.          Invited lecture, Illinois Institute of Technology, April 30, 2004, Chicago, IL, “A Novel Integrated Alternator/Active Filter for Wind Power Applications”.

41.          Invited lecture, University of Missouri-Rolla, April 28, 2004, Rolla, MO, “Fault Tolerant Matrix Converters”.

42.          Invited short course presented at the Army Research Lab (TARDEC), Jan. 14, 2004, Detroit, MI, “Reconfigurable Motor Drives and Power Electronics Based Architectures for Military Vehicles”.

43.          Invited short course presented at the IEEE-IECON’03, November 2-6, 2003, Roanoke, VA, “Applications of Power Electronics in Automotive Industry: State of the Art and Future Possibilities”.

44.          Invited lecture, Hyundai Motor Company, Advanced Technology Center, Seoul, Korea, July 16, 2003.

45.          Invited lecture, LG Electronics, Home Appliance Research Laboratory, Seoul Korea. July 15, 2003.

46.          Invited lecture, Samsung Electronics, Digital Appliance Research Laboratory, Seoul, Korea, July 16, 2003.

47.          Invited short course, Korean Agency for Technology and Standards (ATS), Seoul, Korea, July 14, 2003.

48.          Invited lecture, Korea Electronics Technology Institute (KETI), Seoul, Korea, July 14, 2003.

49.          Invited lecture, Korea Electric Research Institute (KERI), Seoul, Korea, July 18, 2003.

50.          Invited short course presented at the IEEE-APEC’03, February 9-13, 2003, Miami Beach, FL, “Synthesis of Advanced Control Methodologies for High Grade Adjustable Speed Motor Drives: Theory and Applications”.

51.          Invited short course presented at the Army Research Lab (TARDEC), Dec. 5, 2002, Detroit, MI, “Condition Monitoring and Fault Diagnosis of Electric Machines and Fault Tolerant Electric Machinery”.

52.          Invited short course presented at the IEEE-IECON’02, November 5-8, 2002, Seville, Spain, “Integration of Advanced Motion Control Devices in automotive Products: Design in the Context of the Application.

53.          Invited short course presented at the IEEE-IAS, October 13-17, 2002, Pittsburgh, PA, “Selection, Design, and Control of Adjustable Speed Motor Drives for Stressful & Fault Tolerant Applications”.

54.          Invited short course presented at the IEEE Applied Power Electronics Conference and Exposition, March 10-14, 2002, Dallas, TX, “Sensorless Control of Adjustable Speed Motor Drives:  State of the Art and Recent Advances”

55.          Invited short course at Copeland Corporation, Sidney, OH, November 2, 2001, “Fault Diagnosis of Electric Machines”.

56.          Invited short course presented at the IEEE Applied Power Electronics Conference and Exposition, March 4-8, 2001, Anaheim, CA, “Current Intensive Motor Drives: A New Challenge in Automotive Applications”

57.          Invited Tutorial at 2nd International Conference on Power Electronics Drives and Energy Systems for Industrial Growth, IEEE-PEDES’98, Perth, Australia, 1-3 Dec., “Condition Monitoring and Fault Diagnosis of Electric Machines & Transformers”.

58.          Invited Seminar at Small Motors & Motion Association, Nashville, TN, Nov. 12, 1998, “Adjustable Speed AC Motor Drives: Application Problems and Solutions”.

59.          Invited short course at Reliance Electric, Cleveland, OH, March 27, 1997, “Fault Diagnosis of Electric Machines”.

60.          Invited short course at Whirlpool Co, Benton Harbor, MI, Dec. 5-6, 1996, “Permanent Magnet Motors”.

61.          Invited short course at Texas Instruments INC., Dallas, TX, Jan. 26, 1996, “Switched Reluctance Motor Drives”.

62.          Invited short course at LeTourneau Inc, Longview, TX, Jan. 12, 1996, “Design and Control of Switched Reluctance Motors”.

63.          Invited short course at General Motors Mesa Desert Proving Ground, Phoenix, AZ, Oct. 27, 1995, “Electric Drives for Electric and Hybrid Vehicles”.

64.          Invited short course at General Motors Milford Proving Ground, Detroit, MI, Sep. 8, 1995, “Electric Drives for Electric and Hybrid Vehicles”.

65.          Invited short course at IEEE Applied Power Electronics Conference and Exposition, March 4, 1995, Dallas, “Electric Drives for Electric and Hybrid Vehicles”.

66.          Invited Speaker at IEEE Industry Applications Society, Dallas Section, "Power electronics and Electric Machines-A Technology Review, Feb. 21, 1995.

67.          IEEE Distinguished Speaker, Iran Chapter.

Back to top

Journal Papers:

1.              S.B. Ozturk, W.C. Alexander, and H.A. Toliyat, “Direct Torque Control of Four-Switch Brushless DC Motor with Non-sinusoidal Back-EMF,” To appear in the IEEE Transactions on Power Electronics.

2.              B. Akin, S.B. Ozturk, H.A. Toliyat, and M. Rayner, “On-board Fault Diagnosis of HEV Induction Motor Drive at Start-up and during Idle Mode,” To appear in the IEEE Transactions on Vehicular Technology.

3.              L. Parsa, A. Goodarzi, and H.A. Toliyat, “Five-Phase Interior Permanent Magnet Motor for Hybrid Electric Vehicle Application,” To appear in the IEEE Transactions on Vehicular Technology.

4.              S. Kwak, and H.A. Toliyat, “Comparison and Assessment of Current-Source-Inverter-Fed Induction Motor Drive Systems with Unity Power Factor,” To appear in the IEEE Transactions on Industrial Electronics.

5.              Y. Kumsuwan, S. Premrudeepreechacharn, and H.A. Toliyat, “Improved Performance in Direct Torque Control for Induction Motor Drives using Decoupled Amplitude and Angle of the Stator Flux Control,” To appear in the IEEE Transactions on Energy Conversion.

6.              E. Levi, R. Bojoi, F. Profumo, H.A. Toliyat, and S. Williamson, “Multiphase Induction Motor Drives – A Technology Status Review, Invited Paper, To appear in the IEE Proceedings  on Electric Power Applications.

7.              E.C. dos Santos Jr., C.B. Jacobina, H.A. Toliyat, and E.R.C. da Silva, “Monolithic Systems using Standard Three-leg Inverter Supplying Independently Two Motors, IEEE Transactions on Industry Applications, Vol. 45, No. 5, Sep./Oct. 2009, pp. 1660-1669.

8.              J. Faiz, B.M. Ebrahimi, and H.A. Toliyat, “Effect of Magnetic Saturation on Static and Mixed Eccentricity Faults Diagnosis in Induction Motor,” IEEE Transactions on Magnetics, Vol. 45, No. 8, Aug. 2009, pp. 3137-3144.

9.              B. Akin, S.B. Ozturk, H.A. Toliyat, and M. Rayner, “DSP-Based Sensorless Electric Motor Fault Diagnosis Tools for Electric and Hybrid Electric Vehicle Powertrain Applications, IEEE Transactions on Vehicular Technology, Vol. 58, No. 5, June 2009, pp. 2150-2159.

10.          J. Faiz, B.M. Ebrahimi, B. Akin, and H.A. Toliyat, “Comprehensive Eccentricity Fault Diagnosis in Induction Motors using Finite Element,” IEEE Transactions on Magnetics, Vol. 45, No. 3, March 2009, pp. 1764-1767.

11.          J. Faiz, B.M. Ebrahimi, M. Malavi, and H.A. Toliyat, “Mixed Eccentricity Fault Diagnosis on Salient-Pole Synchronous Generator using Modified Winding Function Method,” Progress in Electromagnetics Research B, Vol. 11, 2009, pp. 155-172.

12.          E. Levi, M. Jones, S.N. Vukosavic, and H.A. Toliyat, “Steady-State Modeling of Series-Connected Five-Phase and Six-Phase Two-Motor Drives,” IEEE Transactions on Industry Applications, Vol. 44, No. 5, Sep./Oct. 2008, pp. 1559-1568.

13.          B. Akin, H.A. Toliyat, U. Orguner, and M. Rayner, “Phase Sensitive Detection of Motor Fault Signatures in the Presence of Noise,” IEEE Transactions on Industrial Electronics, Vol. 55, No. 6, June 2008, pp. 2539-2550.

14.          M.T. Abolhassani, P. Enjeti, and H.A. Toliyat, “Integrated Doubly Fed Electric Alternator/Active Filter (IDEA), a Viable Power Quality Solution, for Wind Energy Conversion System,” IEEE Transactions on Energy Conversion, Vol. 23, No. 2, June 2008, pp. 642-650.

15.          Y. Kumsuwan, S. Premrudeepreechacharn, and H.A. Toliyat, “Modified Direct Torque Control Method for Induction Motor Drives based on Amplitude and Angle Control of Stator Flux,” Electric Power Systems Research, Vol. 78, No. 10, Oct. 2008, pp. 1712-1718.

16.          M. Wlas, Z. Krzeminski, and H.A. Toliyat, “Neural Network-Based Parameters Estimations of Induction Motors,” IEEE Transactions on Industrial Electronics, Vol. 55, No. 4, April 2008, pp. 1783-1794.

17.          B. Akin, H.A. Toliyat, Y. Durrani, and M. Rayner, “Low Order PWM Inverter Harmonics Contributions to the Inverter-Fed Induction Machine Fault Diagnosis, IEEE Transactions on Industrial Electronics, Vol. 55, No. 2, Feb. 2008, pp. 610-619.

18.          J. Faiz, B.M. Ebrahimi, B. Akin, and H.A. Toliyat, “Finite-Element Transient Analysis of Induction Motors under Mixed Eccentricity Fault,” IEEE Transactions on Magnetics, Vol. 44, No. 1, Jan. 2008, pp. 66-74.

19.          S. Kwak, and H.A. Toliyat, “An Approach to Fault-Tolerant Three-Phase Matrix Converter,” IEEE Transactions on Energy Conversion, Vol. 22, No. 4, Dec. 2007, pp. 855-863.

20.          H. Sahraoui, H. Zeroug, and H.A. Toliyat, “Switched Reluctance Motor Design using Neural-Network Method with Static Finite-Element Simulation, ” IEEE Transactions on Magnetics, Vol. 43, No. 12, Dec. 2007, pp. 4089-4095.

21.          J. Faiz, M.B. Ebrahimi, and H.A. Toliyat, “Signature Analysis of Electrical and Mechanical Signals for Diagnosis of Broken Rotor Bars in Induction Motor,  Journal of Electromagnetics, Vol. 27, No. 8, November 2007, pp. 507-526.

22.          L. Parsa, and H.A. Toliyat, “Sensorless Direct Torque Control of Five-Phase Interior Permanent Magnet Motor Drives,” IEEE Transactions on Industry Applications, Vol. 43, No. 4, July/August 2007, pp. 952-959.

23.          L. Parsa, and H.A. Toliyat, “Fault-Tolerant Interior permanent Magnet Machines for Hybrid Electric Vehicle Applications, IEEE Transactions on Vehicular Technology, Vol. 56, No. 4, July 2007, pp. 1546-1552.

24.          P. Niazi, and H.A. Toliyat, and A. Goodarzi, “Robust Maximum Torque per Ampere (MTPA) Control of PM-Assisted SynRM for Traction Applications, IEEE Transactions on Vehicular Technology, Vol. 56, No. 4, July 2007, pp. 1538-1545.

25.          E. Levi, M. Jones, A. Iqbal, S.N. Vukosavic, H.A. Toliyat, “Induction Machine/Syn-Rel Two-Motor Five-Phase Series-Connected Drive,” IEEE Transactions on Energy Conversion, Vol. 22, No. 2, June 2007, pp. 281-289.

26.          S. Kwak, and H.A. Toliyat, “Remedial Switching Function Approach to Improve Reliability for AC/AC Converters,” IEEE Transactions on Energy Conversion, Vol. 22, No. 2, 2007, pp. 541-543.

27.          E. Levi, M. Jones, S.N. Vukosavic, A. Iqbal, H.A. Toliyat, “Modeling, Control and Experimental Investigation of a Five-Phase Series-Connected Two-Motor Drive with Single Inverter supply,” IEEE Transactions on Industrial Electronics, Vol. 54, No. 3, June 2007, pp. 1504-1516.

28.          P. Niazi, and H.A. Toliyat, “On-Line Parameter Estimation of Permanent Magnet Assisted Synchronous Reluctance Motor Drives,” IEEE Transactions on Industry Applications, Vol. 43, No. 2, March/April 2007, pp. 609-615.

29.          P. Niazi, H.A. Toliyat, D-H. Cheong, and J-C. Kim, “A Low-Cost and Efficient Permanent Magnet Assisted Synchronous Reluctance Motor Drive,” IEEE Transactions on Industry Applications, Vol. 43, No. 2, March/April 2007, pp. 542-550.

30.          L. Parsa, H.A. Toliyat, and A. Goodarzi, “Five-Phase Interior Permanent Magnet Motor with Low Torque Pulsation, IEEE Transactions on Industry Applications, Vol. 43, No. 1, Jan./Feb. 2007, pp. 40-46.

31.          S. Kwak, and H.A. Toliyat, “A Current Source Inverter with Advanced External Circuit and Control Method,” IEEE Transactions on Industry Applications, Vol. 42, No. 6, Nov./Dec. 2006, pp. 1496-1507.

32.          S. Kwak, and H.A. Toliyat, “Multilevel Current Source Inverter Topology Based on Dual Structure Associations for Induction Motor Drives,” IEEE Transactions on Industry Applications, Vol 42, No. 6, Nov./Dec. 2006, pp. 1558-1564.

33.          M.R. Rafiei, R. Ghazi, R. Asgharian, H.A. Toliyat, and M. Barakati, ”Robust Control Methodologies For dc/dc PWM Converters Under Wide Changes in Operating Conditions,” WSEAS Transactions on Systems, No. 11, Vol. 5, Nov. 2006.

34.          S. Kwak, and H.A. Toliyat, “Current Source Rectifier Topologies for Sinusoidal Supply Current: Theoretical Studies and Analyses,” IEEE Transactions on Industrial Electronics, Vol. 53, No.3, June 2006, pp. 984-987.

35.          S. Kwak, and H.A. Toliyat, “Simple Energy Recovery and Commutation Circuit for Six-step Current-fed Inverters,” IEEE Transactions on Energy Conversion, Vol. 21, No. 2, June 2006, pp. 616-618.

36.          I.M. Panahi, and H.A. Toliyat, “An Efficient Processor-Based Online Generation of Time-Optimal Trajectories, IEEE Transactions on Control Systems Technology, Vol. 14, No. 5, Sep. 2006, pp. 966-973.

37.          L. Parsa, and H.A. Toliyat, “A Fault Resilient IPM Motor Drive for Wide Speed Range Operation, Naval Engineers Journal, Vol. 117, No. 4, Fall 2005.

38.          S. Nandi, H.A. Toliyat, and X. Li, “Condition Monitoring and Fault Diagnosis of Electrical Machines-A Review,” IEEE Transactions on Energy Conversion, Vol. 20, No. 4, Dec. 2005, pp. 719-729. (IEEE Power Engineering Society Prize Paper Award, 2007).

39.          S. Kwak, and H.A. Toliyat, “Design and Rating Comparisons of PWM Voltage Source Rectifiers and Active Filters for AC Drives with Unity Power Factor,” IEEE Transactions on Power Electronics, Vol. 20, No. 5, Sep. 2005, pp. 1133-1142.

40.          M. Wlas, H. Abu-Rub, Z. Krezeminski, J. Guzinski, and H.A. Toliyat, “Artificial Neural Network-Based Sensorless Nonlinear Control of Induction Motors,” IEEE Transactions on Energy Conversion, Vol. 20, No. 3, Sep. 2005, pp. 520-528.

41.          S. Kwak, and H.A. Toliyat, “A Hybrid Converter System for High Performance Large Induction Motor Drives,” IEEE Transactions on Energy Conversion, Vol. 20, No. 3, Sep 2005, pp.504-511.

42.          S. Kwak, and H.A. Toliyat, “Development of Modulation Strategy for Two-phase ac-ac Matrix Converter, IEEE Transactions on Energy Conversion, Vol. 20, No. 2, June 2005, pp. 493-494.

43.          S.M.A. Cruz, H.A. Toliyat, and A.J.M. Cardoso, “DSP Implementation of the Multiple Reference Frames Theory for the Diagnosis of Stator Faults in a DTC Induction Motor Drive,” IEEE Transactions on Energy Conversion, Vol. 20, No. 2, June 2005, pp. 329-335.

44.          H.A. Toliyat, P. Niazi, and K. Godbole, “Overcoming Vector Control Challenges,” Motion System Design, March 2005, pp. 20-24.

45.          S. Kwak, and H.A. Toliyat, “A Hybrid Solution for Load Commutated Inverter-Fed Induction motor Drives,” IEEE Transactions on Industry Applications, Vol. 41, No.1, Jan./Feb. 2005, pp. 83-90.

46.          L. Parsa, and H.A. Toliyat, “A New Five-Phase Permanent Magnet Motor Drive for Traction Applications,” IEEE Transactions on Industry Applications, Vol. 41, No. 1, Jan./Feb. 2005, pp. 30-37, (2006 Third Prize Transactions Paper Award).

47.          S. Kwak, and H.A. Toliyat, “Design and Performance Comparisons of Two Multi-drive Systems with Unity Power Factor,” IEEE Transactions on Power Delivery, Vol. 20, No. 1, January 2005, pp. 417-426.

48.          E. Levi, M. Jones, S. Vukosavic, and H.A. Toliyat, “Operating Principles of a Novel Multi-Phase Multi-Motor Vector Controlled Drive, IEEE Transactions on Energy Conversion, Vol. 19, No. 3, Sep. 2004, pp. 508-517.

49.          E. Levi, M. Jones, S. Vukosavic, and H.A. Toliyat, “A Five-Phase Two-Machine Vector Controlled Induction Motor Drive Supplied from a Single Inverter, EPE Journal, Vol. 14, No.3, pp. 38-48, 2004.

50.          H. Abu-Rub, J. Guzinski, Z. Krzeminski, and H.A. Toliyat, “Predictive Current Control of Voltage Source Inverters,” IEEE Transactions on Industrial Electronics, Vol. 51, No. 3, June 2004, pp. 585-593.

51.          R.M. Bharadwaj, A.G. Parlos, and H.A. Toliyat, “Neural Speed Filtering for Sensorless Induction Motor Drives, Journal of Control Engineering Practice, Elsevier, 2004, pp. 687-706.

52.          S. Kwak, and H.A. Toliyat, “Optimized Power Distribution to Minimize the Power Ratings of Paralleled Rectifiers, The IEE Electronics Letters, Vol. 40, No. 5, March 2004, pp. 336-338.

53.          E. Levi, M. Jones, S. Vukosavic, and H.A. Toliyat, “A Novel Concept of a Multiphase, Multi-motor Vector Controlled Drive System Supplied from a Single Voltage Source Inverter,” IEEE Transactions on Power Electronics, Vol. 19, No. 2, March 2004, pp. 320-335.

54.          H. Abu-Rub, J. Guzinski, Z. Krzeminski, and H.A. Toliyat, “Advanced Control of Induction Motor Based on Load Angle Estimation,” IEEE Transactions on Industrial Electronics, Vol. 51, No. 1, Feb. 2004, pp. 5-14

55.          H. Meshgin-Kelk, J. Milimonfared, and H.A. Toliyat, “Interbar Currents and Axial Fluxes in Healthy and Faulty Induction Motors,” IEEE Transactions on Industry Applications, Vol. 40, No. 1, Jan/Feb 2004, pp. 128-134.

56.          M. Hajiaghajani, H.A. Toliyat, and I.M.S. Panahi, “Advanced Fault Diagnosis of a DC Motors,” IEEE Transactions on Energy Conversion, Vol. 19, No.1, March 2004, pp. 60-65.

57.          K. Abbaszadeh, J. Milimonfared, and H.A. Toliyat, “A Novel Approach to Broken Bar Detection in Induction Motor via Wavelet Transformation,” Iranian Journal of Science and Technology, Transaction B: Engineering, Vol. 27, No. B4, 2003, pp. 763-770.

58.          J. Guzinski, H. Abu-Rub, and H.A. Toliyat, “An Advanced Low-Cost Sensorless Induction Motor Drive,” IEEE Transactions on Industry Applications, vol. 39, No. 6, November/December 2003, pp. 1757-1764.

59.          T. Gopalarathnam, and H.A. Toliyat, “A New Topology for Unipolar Brushless DC Motor Drive with High Power Factor,” IEEE Transactions on Power Electronics, Vol. 18, No. 6, November 2003, pp. 1397-1404.

60.          H.A. Toliyat, K. Abbaszadeh, M. Rahimian, and L.E. Olson, “Rail Defect Diagnosis using Wavelet Packet Decomposition,” IEEE Transactions on Industry Applications, Vol. 39, Sep/Oct. 2003, pp. 1454-1461.

61.          H.A. Toliyat, E. Levi, and M. Raina, “A Review of RFO Induction Motor Parameter Estimation Techniques,” IEEE Transactions on Energy Conversion, Vol. 18, No. 2, June 2003, pp. 271-283.

62.          S. Nandi, S. Ahmed, and H.A. Toliyat, and R.M. Bharadwaj, “Selection Criteria of Induction Machines for Speed-Sensorless Drives Applications,”  IEEE Transactions on Industry Applications, Vol. 39, No. 3, May/June 2003, pp. 704-712.

63.          H. Abu-Rub, J. Guzinski, Z. Krzeminski, and H.A. Toliyat, “Speed Observer System for Advanced Sensorless Control of Induction Motor,” IEEE Transactions on Energy Conversion, Vol. 18, No. 2, June 2003, pp. 219-224.

64.          H. Meshgin-Kelk, H.A. Toliyat, and J. Milimonfared, “A Comprehensive Method for the Calculation of Inductance Coefficient of Cage Induction Machines,” IEEE Transactions on Energy Conversion, Vol. 18, No. 2, June 2003, pp. 187-193.

65.          J. Faiz, I. Tabatabaei, and H.A. Toliyat, “An Evaluation of Squirrel-Cage Induction Motor Inductances under Mixed Eccentric Conditions,” IEEE Transactions on Energy Conversion, Vol. 18, No.2, June 2003, pp. 252-258.

66.          H. Abu-Rub, J. Guzinski, Z. Krzeminski, and H.A. Toliyat, “Problems of Exact Generation of Inverter Output Voltage,” Journal of Electric Power Components and Systems, Vol. 30, No. 12, 2002, pp. 1261-1277.

67.          H.A. Toliyat, S. Ahmed, W. Choi, and P.N. Enjeti, “Instrument Selection Criteria for Non-sinusoidal Power Measurements,” ASHRAE Transactions 2002, Vol. 108, Part 2, pp. 897-903.

68.          S. Ahmed, W. Choi, H.A. Toliyat, and P.N. Enjeti, “Characterization of Non-sinusoidal Measurement Station Component Requirements and Errors,” ASHRAE Transactions 2002, Vol. 108, Part 2.

69.          S. Nandi, R. Bharadwaj, H.A. Toliyat, “Performance Analysis of a Three Phase Induction Motor under Mixed Eccentricity Condition,” IEEE Transactions on Energy Conversion, Vol. 17, No. 3, September 2002.

70.          S.M.R. Rafiei, R. Ghazi, H.A. Toliyat, “IEEE-519-Based Real Time and Optimal Control of Active Filters Under Non-Sinusoidal Line Voltages Using Neural Networks,” IEEE Transactions on Power Delivery, Vol. 17, No. 3, July 2002, pp. 815-821.

71.          E. Afjei, and H.A. Toliyat, “A Novel Multilayer Switched Reluctance Motor,” IEEE Transactions on Energy Conversion, Vol. 17, No. 2, June 2002.

72.          H. Xu, H.A. Toliyat, and L.J. Peterson, “Five-Phase Induction Motor Drives with DSP-Based Control Systems,” IEEE Transactions on Power Electronics, Vol. 17, No. 4, July 2002, pp. 524-533.

73.          R. Ghazi, S.M.R. Rafiei, and H.A. Toliyat, "A Programmable Control Strategy For Optimal and Flexible Active Filtering and Power Factor Correction Under Non Sinusoidal Line Voltages, Iranian Journal of Science & Technology (IJST), Shiraz University, Shiraz, Iran, ISSN 0363-1307, 2002.

74.          H.A. Toliyat, L. Hao, D.S. Shet, and T.A. Nondahl, “Position Sensorless Control of Surface Mount Permanent Magnet AC (PMAC) Motors at Low Speeds,” IEEE Transactions on Industrial Electronics, Vol. 49, No. 1, February 2002, pp. 157-164.

75.          S. Nandi, and H.A. Toliyat, “Novel Frequency-Domain-Based Technique to Detect Stator Interturn Faults in Induction Machines using Stator-Induced Voltages after Switch-off," IEEE Transactions on Industry Applications, Vol. 38, No. 1, Jan/Feb. 2002, pp. 101-109.

76.          H.A. Toliyat, H. Xu, and L.J. Peterson, “DSP-Based Direct Torque Control (DTC) for Five-Phase Induction Machines,” IEEJ Transactions on Industry Applications, Vol. 121-D, No. 12, Dec. 2001, pp. 1256-1262.

77.          M. Haji, and H.A. Toliyat, “Pattern Recognition – A Technique for Induction Machines Rotor Broken Bar Detections,” IEEE Transactions on Energy Conversion, Vol. 16, No. 4, Dec. 2001, pp. 312-317.

78.          J. Hur, H.A. Toliyat, and J. Hong, “3D Time-Stepping Analysis of Induction Motor by New 3-D Equivalent Magnetic Circuit Network Method,” IEEE Transactions on Magnetics, Vol. 37, No. 5, September 2001, pp. 3225-3228.

79.          S. Nandi, S. Ahmed, and H.A. Toliyat, “Detection of Rotor Slot and Other Eccentricity Related Harmonics in a Three Phase Induction Motor with Different Rotor Cages,” IEEE Transactions on Energy Conversion, Vol. 16, No. 3, September 2001, pp. 253-260.

80.          J. Hur, H.A. Toliyat, and J. Hong, “Dynamic Analysis of Linear Induction Motors using 3-D Equivalent Magnetic Circuit Network (EMCN) Method,” Journal of Electric Machines and Power Systems, Vol. 29, No. 6, June 2001, pp. 531-541.

81.          S.M.R. Rafiei, H.A. Toliyat, R. Ghazi, and T. Gopalarathnam, “An Optimal and Flexible Control Strategy for Active Filtering and Power Factor Correction under Non-Sinusoidal Line Voltage,” IEEE Transactions on Power Delivery, Vol. 16, No. 2, Apr. 2001, pp. 297-305.

82.          H.A. Toliyat, K.M. Rahman, D.S. Shet, “Sensorless Operation of Surface Mount Permanent Magnet AC (PMAC) Motors,” IEEE Transactions on Energy Conversion, Vol. 14, No. 4, Dec. 1999, pp. 1004-1010.

83.          H.A. Toliyat, G. Suresh, A. Abur, “Estimation of Voltage Distribution on the Inverter Fed Random Wound Induction Motor Windings Supplied through Feeder Cable”, IEEE Transactions on Energy Conversion, Vol. 14, No. 4, Dec. 1999, pp. 976-981.

84.          J. Milimonfared, H. Meshgin Kelk, A. Der Minassians, S. Nandi, and H.A. Toliyat, “A Novel Approach for Broken Rotor Bar Detection in Cage Induction Motors,” IEEE Transactions on Industry Applications, Vol. 35, No. 5, Sept/Oct. 1999, pp. 1000-1006.

85.          H.A. Toliyat, M.S. Arefeen, K.M. Rahman, D. Figoli, “Rotor Time Constant Updating Scheme for a Rotor Flux Oriented Induction Motor Drive,” IEEE Transactions on Power Electronics, Vol. 14, No. 5, Sept. 1999, pp. 850-857.

86.          H.A. Toliyat, N. Sultana, D. Shet, J.C. Moreira, “Brushless Permanent Magnet Motor Drive System using Load Commutated Inverter, IEEE Transactions on Power Electronics, Vol. 14, No. 5, Sept. 1999, pp. 831-837.

87.          H.A. Toliyat, N. Al-Nuaim, “Simulation and Detection of Dynamic Air-Gap Eccentricity in Salient Pole Synchronous Machines,” IEEE Transactions on the Industry Applications, Vol. 35, No. 1, Jan./Feb. 1999, pp. 86-93.

88.          G. Suresh, H.A. Toliyat, D.A. Rendusara, and P.N. Enjeti, "Predicting the Transient Effects of PWM Voltage Waveform on the Stator Windings of a Random Wound Induction Motors, " IEEE Transactions on Power Electronics, Vol. 14, No.1, Jan.1999, pp. 23-30.

89.          H.A. Toliyat, “Analysis and Simulation of Five-Phase Variable Speed Induction Motor Drives Under Asymmetrical Connections,” IEEE Transactions on Power Electronics, Vol. 13, No. 4, July 1998, pp. 748-756.

90.          H.A. Toliyat, S. Waikar, T.A. Lipo, "Analysis and Simulation of Five Phase Synchronous Reluctance Machines Including Third Harmonic of Air-Gap MMF," IEEE Transactions on the Industry Applications, Vol. 34, No. 2, March/April 1998, pp. 332-339.

91.          N.A. Al-Nuaim, and H.A. Toliyat, “A Novel Method for Modeling Dynamic Air-Gap Eccentricity in Synchronous Machines Based on Modified Winding Function Theory,” IEEE Transactions on Energy Conversion, Vol. 13, No. 2, June 1998, pp. 156-162.

92.          H.A. Toliyat, and N. Sargolzaei, “A Comprehensive Method for Transient Modeling of Single Phase Induction Motors Including the Space Harmonics” Journal of Electric Machines and Power Systems, Volume 26, No. 3, 1998, pp. 221-234.

93.          M. Ehsani, K.M. Rahman, H.A. Toliyat, “Propulsion System Design of Electric and Hybrid Vehicles,” IEEE Transactions on Industrial Electronics, Special Section on Electric Vehicles Technology, Vol. 44, No. 1, Feb. 1997, pp. 19-27.

94.          H.A. Toliyat, M.S. Arefeen, A.G. Parlos, “A Method for Dynamic Simulation and Detection of Air-Gap Eccentricity in Induction Machines,” IEEE Transactions on Industry Applications, Vol. 32, No. 4, July/August 1996, pp. 910-918.

95.          H.A. Toliyat, J. Sadeh, and R. Ghazi, “Design of Augmented Fuzzy Logic Power System Stabilizers to Enhance Power System Stability,” IEEE Transactions on Energy Conversion, Vol. 11, No. 1, March 1996, pp. 97-103.

96.          H.A. Toliyat, and T.A. Lipo, "Transient Analysis of Cage Induction Machines Under Stator, Rotor Bar and End Ring Faults," IEEE Transactions on Energy Conversion, Vol. 10, No. 2, June 1995, pp. 241-247.

97.          X. Luo, Y. Liao, H.A. Toliyat, A. El-Antably, and T.A. Lipo, "Multiple Coupled Circuit Modeling of Induction Machines," IEEE Transactions on Industry Applications, Vol. 31, No. 2, March/April 1995, pp.311-318.

98.          H.A. Toliyat, and T.A. Lipo, "Analysis of Concentrated Winding Induction Machines for Adjustable Speed Drive Applications-Experimental Results," IEEE Transactions on Energy Conversion, Vol. 9, No. 4, Dec. 1994, pp. 695-700. (Best Transactions Prize Paper Award)

99.          H.A. Toliyat, L. Xue, and T.A. Lipo, "A Five Phase Reluctance Motor with High Specific Torque," IEEE Transaction on Industry Applications, vol. 28, No. 3, May/June 1992, pp. 659-667.

100.       H.A. Toliyat, T.A. Lipo, and J.C. White, "Analysis of a Concentrated Winding Induction Machine for Adjustable Speed Drive Applications- part I (Motor Analysis)," IEEE Transaction on Energy Conversion, vol. 6, No. 4, Dec. 1991, pp. 679-692.

101.       H.A. Toliyat, T.A. Lipo, and J.C. White, "Analysis of a Concentrated Winding Induction Machine for Adjustable Speed Drive Applications- part II (Motor Design and Performance)," IEEE Transaction on Energy Conversion, vol. 6, No. 4, Dec. 1991, pp. 685-692.

Back to top

Conference Papers:

1.              S.D. Choi, B. Akin, M.M. Rahimian, H.A. Toliyat, “A Robust Sensorless Fault Diagnosis Algorithm for Low Cost Motor Drives,” To be presented at APEC’10, Palm Spring, CA.

2.              Y. Kumsuwan, W. Srirattanawichaikul, S. Premrudeepreechacharn, and H.A. Toliyat, “A Four-leg Voltage Source Inverter Fed Asymmetrical Two-Phase Induction Motor Drive,” To be presented at the 5th IET International Conference on Power Electronics, Machines and Drives, April 19-21, 2010, Brighton, UK.

3.              J. Baek, M.M. Rahimian, and H.A. Toliyat, “Optimal Design of PM assisted Synchronous Reluctance Generators using Lumped Parameter Model and Differential Evolution Strategy,” Proceedings of the ECCE’09, San Jose, CA.

4.              M. Amirabadi, H.A. Toliyat, and W. Alexander, “Battery-Utility Interface using Soft Switched AC Link supporting Low Voltage Ride Through,” Proceedings of the ECCE’09, San Jose, CA.

5.              P. Rasmussen, T. Jahns, H.A. Toliyat, H-H. Mortensen, and T. Matzen, “Motor Integrated Permanent Magnet Gear with a Wide Torque-Speed Range,” Proceedings of the ECCE’09, San Jose, CA.

6.              S.D. Choi, B. Akin, M.M. Rahimian, H.A. Toliyat, “Condition Monitoring Technique of Induction Machines with Ordered Harmonic and Noise Cancelation,” Proceedings of IEMDC 2009, Miami, FL, May 3-6, 2009.

7.              S.D. Choi, B. Akin, M.M. Rahimian, H.A. Toliyat, M. Azadpour, and M. Rayner, “Condition Monitoring Technique of Multiphase Induction Machine,” Proceedings of IEMDC 2009, Miami, FL, May 3-6, 2009.

8.              J. Baek, and H.A. Toliyat, “Optimal Design and Comparison of Stator Winding Configurations in Permanent Magnet-Assisted Synchronous Reluctance Generators (PMa-SynRG),” Proceedings of IEMDC 2009, Miami, FL, May 3-6, 2009.

9.              M. Amirabadi, H.A. Toliyat, W.C. Alexander, “Battery-Utility Interface using Soft Switched AC Link Buck-Boost Converter,” Proceedings of IEMDC 2009, Miami, FL, May 3-6, 2009.

10.          N.W. Frank, and H.A. Toliyat, “Gearing Ratios of a Magnetic Gear for Wind Turbines,” Proceedings of IEMDC 2009, Miami, FL, May 3-6, 2009.

11.          H.A. Toliyat, B. Nikbakhtian, S. Talebi, and P. Niazi, “A Mathematical Modeling of an “N” Flux Barrier per Pole Permanent Magnet-Assisted Synchronous Reluctance Motor for Analytical Purposes,” Proceedings of IEMDC 2009, Miami, FL, May 3-6, 2009.

12.          M.T. Abolhassani, and H.A. Toliyat, “Fault Tolerant Permanent Magnet Motor Drives for Electric Vehicles,” Proceedings of IEMDC 2009, Miami, FL, May 3-6, 2009.

13.          N.W. Frank, and H.A. Toliyat, “Gearing Ratios of a Magnetic Gear for Marine Applications,” Proceedings of ESTS 2009, Baltimore, MD, April 20-22, 2009.

14.          S. Talebi, B. Nikbakhtan, and H.A. Toliyat, “Analytical Model-Based Analysis of High-Speed Flywheel Energy Storage Systems for Pulsed Power Applications,” Proceedings of ESTS 2009, Baltimore, MD, April 20-22, 2009.

15.          H.A. Toliyat, and R. Vartanian, “Design and Comparison of an Optimized Permanent Magnet-Assisted Synchronous Reluctance Motor (PMa-SynRM) with an Induction Motor with Identical NEMA Frame Stators,” Proceedings of ESTS 2009, Baltimore, MD, April 20-22, 2009.

16.          B. Akin, H.A. Toliyat, “DSP Based Implementation of Continuous Multi-Fault Signature Monitoring,” Proceedings of the 24th Annual Applied Power Electronics Conference and Exposition (APEC’09), Feb 15-19, Washington, DC, 2009.

17.          S. Choi, B. Akin, M.M. Rahimian, and H.A. Toliyat, “Fault Diagnosis Implementation of Induction Machine Based on Advanced Digital Signal Processing Techniques,” Proceedings of  the 24th Annual Applied Power Electronics Conference and Exposition (APEC’09), Feb 15-19, Washington, DC, 2009.

18.          A. Balakrishnan, M. Amirabadi, H.A. Toliyat, and W. Alexander, “Soft Switched AC-Link Wind Power Converter,” Proceedings of IEEE International Conference on
Sustainable Energy Technologies 2008 Conference (ICSET 2008), November 24-27, 2008, Singapore.

19.          M. Amirabadi, A. Balakrishnan, H.A. Toliyat, and W. Alexander, “Soft Switched AC-Link Direct-Connect Photovoltaic Inverter,” Proceedings of IEEE International Conference on
Sustainable Energy Technologies 2008 Conference (ICSET 2008), November 24-27, 2008, Singapore.

20.          S. Talebi, B. Nikbakhtian, and H.A. Toliyat, “Control Design of an Advanced High-Speed Flywheel Energy Storage System for Pulsed Power Applications,” Proceedings of the IECON’08, Nov. 10-13, 2008, Orlando, FL.

21.          S.B. Ozturk, and H.A. Toliyat, “Sensorless Direct Torque Control and Indirect Flux Control of Brushless DC Motor with Non-Sinusoidal Back-EMF,” Proceedings of the IEEE-IECON’08, Nov. 10-13, 2008, Orlando, FL, Best Paper Second Prize by the IES Electrical Machine Technical Committee

22.          A. Awwad, H. Abu-Rub, and H.A. Toliyat, “Nonlinear Autoregressive Moving Average (NARMA-L2) Controller for Advanced AC Motor Control,” Proceedings of the IEEE-IECON’08, Nov. 10-13, 2008, Orlando, FL.

23.          S. Talebi, B. Nikbakhtian, and H.A. Toliyat, “Modeling, DC and Small-Signal AC Analysis of a High-Speed FESS in Synchronous D-Q Reference Frame,” Proceedings of the ICEMS’08, Oct. 17-19, 2008, Wuhan, China.

24.          E.C. dos Santos Jr., C.B. Jacobina, H.A. Toliyat, and E.R.C. da Silva, “Monolithic Systems using Standard Three-leg Inverter Supplying Independently Two Motors, Proceedings of the IEEE-IAS’08, Edmonton, Canada.

25.          J. Baek, M.M. Rahimian, and H.A. Toliyat, “Maximum Output Power Control of Permanent Magnet-Assisted Synchronous Reluctance Generator,” Proceedings of the 18th International Conference on Electrical Machines (ICEM’08), Sep. 6-9, Vilamoura, Portugal.

26.          H.A. Toliyat, A. Balakrishnan, and B. Alexander, “Soft Switched AC-Link AC-AC Buck-Boost Converter,” Proceedings of the IEEE Power Electronics Specialist Conference (PESC’08), June 15-19, Rhodes, Greece.

27.          S.B. Ozturk, W.C. Alexander, and H.A. Toliyat, Invited Paper, “Direct Torque Control of Four-Switch Brushless DC Motor with Non-sinusoidal Back-EMF,” Proceedings of the IEEE Power Electronics Specialist Conference (PESC’08), June 15-19, Rhodes, Greece.

28.          A. Balakrishnan, H.A. Toliyat, W. Alexander, “Soft Switched AC-Link Buck-Boost Converter,” Proceedings of the 2008 Applied Power Electronics and Exposition (APEC), Austin, TX.

29.          J. Faiz, B.M. Ebrahimi, B. Azaie, R. Rajabioun, and H.A. Toliyat, “A Criterion Function for Broken Bar Fault Diagnosis in Induction Motor under Load Variation using Wavelet Transform,” Proceedings of International Conference on Electrical Machines and Systems, Oct. 8-11, Seoul, Korea, pp. 1249-1254.

30.          S.B. Ozturk, O. Yang, and H.A. Toliyat, “Power Factor Correction of Direct Torque Controlled Brushless DC Motor Drive,” Proceedings of the IEEE-IAS’07, New Orleans, LA, Sep. 23-27, 2007.

31.          S. Talebi, P. Niazi, and H.A. Toliyat, “Design of Permanent Magnet-Assisted Synchronous Reluctance Motors Made Easy,” Proceedings of the IEEE-IAS’07, New Orleans, LA, Sep. 23-27, 2007.

32.          B. Akin, S.B. Ozturk, and H.A. Toliyat, “On-board Fault Diagnosis of HEV Induction Motor Drive at Start-up and during Idle Mode,” Proceedings of the VPPC’07, Arlington, TX, Sep. 9-12, 2007.

33.          S. Talebi, and H.A. Toliyat, “A Novel Algorithm for Designing PID Controllers for High-Speed Flywheels,” Proceedings of the VPPC’07, Arlington, TX, Sep. 9-12, 2007.

34.          I. Freitas, H.A. Toliyat, and C. Jacobina, “A PWM strategy with Reduced Bearing Currents for Five-Phase Motors,” Proceedings of the VPPC’07, Arlington, TX, Sep. 9-12, 2007.

35.          R.S. Miranda, H.A. Toliyat, C.B. Jacobina, and A.M.N. Lima, “Short-Circuit Fault Mitigation using Multi-Phase Induction Machine Drive,” Proceedings of the VPPC’07, Arlington, TX, Sep. 9-12, 2007.

36.          S. Ahmed, H. Patibandla, P. Enjeti, and H.A. Toliyat, “A High Density Power Converter for Remotely Operated Loads,” Proceedings of the IEEE-PESC’07, Tampa, FL, June 17-21, 2007.

37.          S. Ahmed, and H.A. Toliyat, “Coupled Field Analysis Needs in the Design of Submersible Electric Motors,” Proceedings of the IEEE-ESTS’07, May 21-23, 2007.

38.          B. Akin, and H.A. Toliyat, “Phase Sensitive Detection of Motor Fault Signatures in the Presence of Noise,” Invited paper, Proceedings of the IEEE International Electric Machines and Drives Conference (IEMDC’07), Antalya, Turkey, May 3-5, 2007.

39.          B. Ozturk, and H.A. Toliyat, “Direct Torque Control of Brushless DC Motor with Non-Sinusoidal Back-EMF,” Proceedings of the IEEE-IEMDC’07, Antalya, Turkey, May 3-5, 2007.

40.          J. Faiz, B.M. Ebrahimi, B. Akin, and H.A. Toliyat, “Study of Mixed Eccentricity Fault in Three-phase Induction Motors using Time Stepping Finite Element Technique,” Proceedings of the IEEE-IEMDC’07, Antalya, Turkey, May 3-5, 2007.

41.          E. Afjei, O. Hashemipour, and H.A. Toliyat, “A New Hybrid Reluctance Motor/Field-Assisted Generator,” Proceedings of the IEEE-IEMDC’07, Antalya, Turkey, May 3-5, 2007.

42.          S. Kwak, and H.A. Toliyat, “Fault-Tolerant Topologies and Switching Function Algorithms for Three-Phase Matrix Converter Based AC Motor Drives Against Open and Short Phase Failures, Proceedings of the IEEE-IEMDC’07, Antalya, Turkey, May 3-5, 2007.

43.          S. Ahmed, and H.A. Toliyat, “Application of a Dual Voltage Exterior Rotor PM Actuator in Compact Harsh Environments,” Proceedings of the IEEE-IEMDC’07, Antalya, Turkey, May 3-5, 2007.

44.          S. Ahmed, and H.A. Toliyat, A New Consideration on the Design Optimization of Submersible Electric Motors,” Invited paper, Proceedings of the International Exhibition & Conference for Power Electronics, Intelligent Motion, Power Quality Power Electronics (PCIM’07), Nuremberg, Germany, May 22-24, 2007.

45.          B. Akin, and H.A. Toliyat, PWM Inverter Harmonics Contributions to the Inverter-Fed IM Bearing Fault Diagnosis, Proceedings of the IEEE Applied Power Electronics Conference and Exhibition (APEC’07), Anaheim, CA, Feb. 25-March 1, 2007.

46.          B. Akin, and H.A. Toliyat, “Low-Cost Motor Drive-Embedded Fault Diagnosis – A Simple Harmonic Analyzer, Proceedings of the IEEE Applied Power Electronics Conference and Exhibition (APEC’07), Anaheim, CA, Feb. 25-March 1, 2007.

47.          N. Kim, H.A. Toliyat, I. Panahi, and M. Kim, “BLDC Motor Control Algorithm for Low-Cost Industrial Applications,” Proceedings of the IEEE Applied Power Electronics Conference and Exhibition (APEC’07), Anaheim, CA, Feb. 25-March 1, 2007.

48.          E. Afjei, and H.A. Toliyat, “A Novel Hybrid Brushless DC Motor/Generator for Hybrid Vehicles Applications,” Proceedings of the IEEE-PEDES’06, Delhi, India.

49.          E. Levi, M. Jones, S.N. Vukosavic, and H.A. Toliyat, “Steady State Modeling of Series-Connected Five-Phase and Six-Phase Two-Motor Drives, Proceedings of the IEEE-IAS Annual Meeting Conference, Oct. 8-12, Tampa, FL, 2006.

50.          E. Levi, M. Jones, S.N. Vukosavic, and H.A. Toliyat, “Stator Winding Design for Multi-Phase Two-Motor Drives with Single VSI Supply,” Proceedings of the 2006 ICEM, Crete Island, Greece, Sep. 2-5, 2006.

51.          B. Akin, B. Ozturk, P. Niazi, H.A. Toliyat, and A. Goodarzi, “Low-Speed Performance Operation of Induction Motors Drives using Low-Resolution Speed Sensor,” Proceedings of the IEEE-ISIE’06, Montreal, Canada, July 9-13, 2006.

52.          S. Kwak, and H.A. Toliyat, “Hybrid Parallel Inverter Configuration with Load Commutated Inverter-Based High-Power Induction Motor Drives,” Proceedings of the IEEE-PESC’06, Ji-Ju Island, Korea.

53.          S. Kwak, and H.A. Toliyat, “Direct AC/AC Converters and Control Techniques for Two-Phase System,” Proceedings of the IEEE-PESC’06, Ji-Ju Island, Korea.

54.          M.R. Rafiei, R. Ghazi, R. Asgharian, H.A. Toliyat, M. Barakati, “Robust Control Methodologies For dc/dc PWM Converters Under Wide Changes in Operating Conditions,” To be presented at the 6th WSEAS Int. Conf. on Applied Informatics and Communications (AIC'06) and the 6th WSEAS Int. Conf. on Signal Processing, Computational Geometry & Artificial Vision (ISCGAV'06) 6th WSEAS Int. Conf. on Systems Theory and Scientific Computation (ISTASC'06), Elounda, Agios Nikolaos, Crete Island, Greece, August 18-20, 2006.

55.          K. Abbaszadeh, S.A. Gholamian, M. Ardebili, and H.A. Toliyat, “Modeling of B-H Loop for Core Loss Calculations in Power Transformer using Finite Element Method,” Proceedings of the 12th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2006).

56.          K. Abbaszadeh, M. Ardebili, S. Jamali, and H.A. Toliyat, “Winding Arrangement effects on Electromagnetic Forces and Short Circuit Reactance Calculation in Power Transformers via Numerical and Analytical Methods,” Proceedings of the 12th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2006).

57.          M. Mirzaei, M. Joorabian, and H.A. Toliyat, “A Combined Method for Analysis of High Speed Linear Induction Machines,” Proceedings of the 12th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2006).

58.          P. Niazi, and H.A. Toliyat, “Robust Maximum Torque per Amp (MTPA) Control of PM-Assisted Synchronous Reluctance Motor Drives,” Proceedings of the IEEE Applied Power Electronics Conference and Exposition, Dallas, TX, Feb. 19-23, 2006.

59.          B.S. Ozturk, H.A. Toliyat, and F. Ashrafzadeh, “Low-Cost Direct Torque Control of Permanent Magnet Synchronous Motors using Hall-Effect Sensors,” Proceedings of the IEEE Applied Power Electronics Conference and Exposition, Dallas, TX, Feb. 19-23, 2006.

60.          B. Akin, and H.A. Toliyat, “TMS320F28xx-based FOC of AC Drives at Very Low Speed Range using Improved Low-Speed measurement Technique for Low-Count Encoders,” Proceedings of the TI Developer Conference 2006.

61.          Y. Kumsuwan, K. Oranpiroj, S. Premrudeepreechacharn, H.A. Toliyat, “A Direct Torque Control of Induction Motor Using V/F PWM Technique, Proceedings of the Sixth International Conference on Power Electronics and Drives Systems, Kuala Lumpur, Malaysia, Nov. 28-Dec. 1, 2005.

62.          P. Niazi, and H.A. Toliyat, “Design of a Low-Cost Concentric Winding Permanent Magnet-Assisted Synchronous Reluctance Motor, Proceedings of the IEEE-IAS Annual Meeting Conference, Hong-Kong, October 2-6, 2005.

63.          H. Meshgin-Kelk, A. Eghbali, and H.A. Toliyat, “Modeling and Analysis of Cage Induction Motors under Rotor Misalignment and Air Gap Eccentricity,” Proceedings of the IEEE-IAS Annual Meeting Conference, Hong-Kong, October 2-6, 2005.

64.          L. Parsa, and H.A. Toliyat, “Five-Phase Interior Permanent Magnet Motors with Low Torque Pulsations,” Proceedings of the IEEE-IAS Annual Meeting Conference, Hong-Kong, October 2-6, 2005.

65.          A. Iqbal, S. Vukosavic, E. Levi, M. Jones, H.A. Toliyat, “Dynamics of a Series-Connected Two-Motor Five-Phase Drive System with a Single-Inverter Supply,” Proceedings of the IEEE-IAS Annual Meeting Conference, Hong-Kong, October 2-6, 2005.

66.          P. Niazi, H.A. Toliyat, and A. Goodarzi, “Robust Maximum Torque per Amp (MTPA) Control of PM-Assisted SynRM for Tractions Applications,” Proceedings of the 2005 IEEE Vehicle Power and Propulsion (VPP) Conference, Chicago, IL, Sep. 7-9, 2005, pp. 658-664.

67.          L. Parsa, A. Goodarzi, and H.A. Toliyat, “Five-Phase Interior Permanent Magnet Motor for Hybrid Electric Vehicle Application,” Proceedings of the 2005 IEEE Vehicle Power and Propulsion (VPP) Conference, Chicago, IL, Sep. 7-9, 2005, pp. 294-300.

68.          H. Meshgin-Kelk, and H.A. Toliyat, “A New Open Terminal Test Approach for Broken Rotor Bar Detection in Cage Induction Motors,” Proceedings of the 5th IEEE International Symposium on Diagnostics, Electric Machines, Power Electronics and Drives, Vienna, Austria, Sep. 7-9, 2005.

69.          S. Talebi, H.A. Toliyat, P. McMullen, C. Huynh, and A. Filatov, “The Impacts of Power Factor and Armature Reaction on the Operation of Surface Mount PMSM Based Flywheel Energy Storage Systems for Pulsed Power Applications,” Proceedings of the IEEE Electric Ship Technologies Symposium (ESTS), Philadelphia, PA, July 25-27, 2005, pp. 379-386.

70.          L. Parsa, and H.A. Toliyat, “Five-Phase Permanent Magnet Motor Drives for Ship Propulsion Applications,” Proceedings of the IEEE Electric Ship Technologies Symposium (ESTS), Philadelphia, PA, July 25-27, 2005, pp. 371-378.

71.          L. Parsa, N. Kim, and H.A. Toliyat, “Field Weakening Operation of High Torque Density Five-Phase Permanent Magnet Motor Drives,” Proceedings of the IEEE-IEMDC’05, San Antonio, TX, May 15-18, 2005, pp. 1507-1512.

72.          P. Niazi, H.A. Toliyat, D-H. Cheong, and J-C. Kim, “A Low-Cost and Efficient Permanent Magnet Assisted Synchronous Reluctance Motor Drive,” Proceedings of the IEEE-IEMDC’05, San Antonio, TX, May 15-18, 2005, pp. 659-666.

73.          P. Niazi, and H.A. Toliyat, “On-Line Parameter Estimation of Permanent Magnet Assisted Synchronous Reluctance Motor Drives, Proceedings of the IEEE-IEMDC’05, San Antonio, TX, May 15-18, 2005, pp. 1031-1036.

74.          S. Kwak, and H.A. Toliyat, “A Current Source Inverter with Advanced External Circuit and Control Method,” Proceedings of the IEEE-IEMDC’05, San Antonio, TX, May 15-18, 2005, pp. 1327-1334.

75.          P. Bazzaz, E. Afjei, and H.A. Toliyat, “A New Power Electronic Converter for Switched Reluctance Motor Drives for High Speed Applications,” Proceedings of the IEEE-IEMDC’05, San Antonio, TX, May 15-18, 2005, pp. 71-73.

76.          M. Abolhassani, H.A. Toliyat, and P.N. Enjeti, “Integrated Doubly-Fed Electric Alternator/Active Filter (IDEA), A Total Energy Crisis and Power Quality Solution for Wind Energy Conversion Systems,” Proceedings of the IEEE-IAS’04, Seattle, WA, October 3-7, 2004.

77.          L. Parsa, and H.A. Toliyat, “Fault-Tolerant Five-Phase Permanent Magnet Motor Drives for Military Applications,” Proceedings of the IEEE-IAS’04, Seattle, WA, October 3-7, 2004.

78.          L. Parsa, and H.A. Toliyat, “Sensorless Direct Torque Control of Five-Phase Interior Permanent Magnet Motor Drives,” Proceedings of the IEEE-IAS’04, Seattle, WA, October 3-7, 2004.

79.          S. Kwak, and H.A. Toliyat, “Multilevel Current Source Inverter Topology Based on Dual Structure Associations for Induction Motor Drives,” Proceedings of the IEEE-IAS’04, Seattle, WA, October 3-7, 2004.

80.          S. Kwak, and H.A. Toliyat, “Evaluation of Two Methods to Obtain Clean Utility: PWM Rectifiers and Active Power Filters,” Proceedings of the IEEE-PESC’04, Aachen, Germany, June 20-25, 2004.

81.          S. Kwak, and H.A. Toliyat, “Design and Performance Comparisons of Two Multi-drive Systems with Unity Power Factor,” Proceedings of the IEEE-PES General Meeting, Denver, CO., June 6-10, 2004.

82.          S. Kwak, and H.A. Toliyat, “A Hybrid Converter System for High Performance Large Induction Motor Drives,” Proceedings of the APEC’04, Anaheim, CA, pp. 529-536.

83.          S. Kwak, and H.A. Toliyat, “DSP-Based Development of a Novel Induction Motor Drive using a Load Commutated Inverter” Proceedings of the TI Developer Conference, Houston, TX, Feb. 18-20, 2004.

84.          L Parsa, and H.A. Toliyat, “A Low Cost DSP-Based Control System for IPM Motor Drives,” Proceedings of the TI Developer Conference, Houston, TX, Feb. 18-20, 2004.

85.          P. Niazi, and H.A. Toliyat, “A Self-Tuning Vector Control Induction Motor with a Low-Count Encoder using Fixed-Point TMS320LF2407, Proceedings of the TI Developer Conference, Houston, TX, Feb. 18-20, 2004.

86.          L. Parsa, and H.A. Toliyat, “A New Five-Phase Permanent Magnet Motor Drive for Propulsion Applications,” Proceedings of the Electric Machines Technology Symposium (EMTS) 2004, Philadelphia, PA, Jan. 27-29, 2004.

87.          L. Parsa, and H.A. Toliyat, “A Fault Resilient IPM Motor Drive for Wide Speed Range Operation,” Proceedings of the Electric Machines Technology Symposium (EMTS) 2004, Philadelphia, PA, Jan. 27-29, 2004.

88.          P. Niazi, and H.A. Toliyat, “A Self-Tuning Vector Control Induction Motor with a Low-Count Encoder for Naval Applications,” Proceedings of the Electric Machines Technology Symposium (EMTS) 2004, Philadelphia, PA, Jan. 27-29, 2004.

89.          S. Kwak, and H.A. Toliyat, “Hybrid Load Commutated Inverter-Based Induction Motor Drive for Commercial and Military Ship Propulsions,” Proceedings of the Electric Machines Technology Symposium (EMTS) 2004, Philadelphia, PA, Jan. 27-29, 2004.

90.          S. Kwak, and H.A. Toliyat, “A Strategy for Improving Reliability of Motor Drive Systems with a Matrix Converter,” Proceedings of the Electric Machines Technology Symposium (EMTS) 2004, Philadelphia, PA, Jan. 27-29, 2004.

91.          L. Parsa, and H.A. Toliyat, A Self Reconfigurable Electric Motor Controller for Hybrid Electric Vehicle Application,” Invited paper, Proceedings of the IEEE-IECON 2003 Annual Meeting, Roanoke, Virginia, Nov. 2-6, 2003, pp. 919-924.

92.          S.M.A. Cruz, A.J.M. Cardoso, and H.A. Toliyat, “New Developments in the Diagnostics of Faults in Line-Connected Motors and DTC Induction Motor Drives,” Invited paper Proceedings of the IEEE-IECON 2003 Annual Meeting, Roanoke, Virginia, Nov. 2-6, 2003, pp. 1361-1368.

93.          B. Fahimi, and H.A. Toliyat, “Application of Power Electronics in Automotive Industry: State of the Art and Future Possibilities,” Proceedings of the IEEE-IECON 2003 Annual Meeting, Roanoke, Virginia, Nov. 2-6, 2003.

94.          S. Kwak, and H.A. Toliyat, “An Approach for Matrix Converter Based Induction Motor Drive with Unity Power Factor and Minimum Switching Losses,” Proceedings of the IEEE-IECON 2003 Annual Meeting, Roanoke, Virginia, Nov. 2-6, 2003, pp. 2939-2944.

95.          S. Kwak, and H.A. Toliyat, “A Comparison and Assessment of Current-Source-Inverter-Fed Induction Motor Drive Systems with Unity Power Factor,” Proceedings of the IEEE-IECON 2003 Annual Meeting, Roanoke, Virginia, Nov. 2-6, 2003, pp. 232-237.

96.          E. Levi, A. Iqbal, S.N. Vukosavic, and H.A Toliyat, “Modeling and Control of a Five-Phase Series Connected Two-Motor Drive,” Proceedings of the IEEE-IECON 2003 Annual Meeting, Roanoke, Virginia, Nov. 2-6, 2003, pp. 208-213.

97.          M. Jones, E. Levi, S.N. Vukosavic, and H.A Toliyat, “A Novel Nine-Phase Four-Motor Drive System with Completely Decoupled Dynamic Control,” Proceedings of the IEEE-IECON 2003 Annual Meeting, Roanoke, Virginia, Nov. 2-6, 2003, pp. 637-642.

98.          S. Kwak, and H.A. Toliyat, “A Novel Hybrid Solution for Load Commutated Inverter-Fed Induction Motor Drives,” Proceedings of the IEEE-IAS 2003 Annual Meeting, Salt Lake City, UT, Oct. 12-16, 2003, pp. 1608-1614.

99.          M.T. Abolhassani, H.A. Toliyat, and P. Enjeti, “A Sensorless Control of Integrated Alternator/Active Filter Doubly—Fed Induction Generator for Variable Speed Wind Energy,” Proceedings of the IEEE-IAS 2003 Annual Meeting, Salt Lake City, UT, Oct. 12-16, 2003, pp. 507-514.

100.       L. Parsa, and H.A. Toliyat, “A New Five-Phase Permanent Magnet Motor Drive for Traction Applications,” Proceedings of the IEEE-IAS 2003 Annual Meeting, Salt Lake City, UT, Oct. 12-16, 2003, pp. 401-408.

101.       L. Hao, and H.A. Toliyat, “BLDC Motor Full Speed Range Operation Including the Flux-Weakening Region,” Proceedings of the IEEE-IAS 2003 Annual Meeting, Salt Lake City, UT, Oct. 12-16, 2003, pp. 618-624.

102.       M. Hajiaghajani, S.M. Madani, L. Hao, and H.A. Toliyat, “A Novel Method for Detection of Eccentricity in PM Machines,” Proceedings of the IEEE-IAS 2003 Annual Meeting, Salt Lake City, UT, Oct. 12-16, 2003, pp. 1833-1838.

103.       S.M.A. Cruz, A.J.M. Cardoso, and  H.A. Toliyat, “ Multiple Reference Frames for the Diagnosis of Stator Faults, Rotor Faults and Eccentricity in Three-Phase Induction Motors, Proceedings of the IEEE-IAS 2003 Annual Meeting, Salt Lake City, UT, Oct. 12-16, 2003, pp. 1340-1346.

104.       A. Bellini, C. Concari, F. Filippetti, G. Franceschini, E. Lorenzani, C. Tassoni, and H.A. Toliyat, “Induction Motors Diagnosis using Deceleration – A Possible Improvement,” Proceedings of the IEEE-IAS 2003 Annual Meeting, Salt Lake City, UT, Oct. 12-16, 2003, pp. 1874-1881.

105.       H. Zeroug, H. Sahraoui, and H.A. Toliyat, “Optimal Design of a Switched Reluctance Motor, Proceedings of the 14th Conference on the Computation of Electromagnetic Fields, Saratoga Springs, NY, July 13-17, 2003.

106.       H. Zeroug, H.A. Toliyat, and H. Sahraoui, “Torque Ripple Minimization of a Switched Reluctance Motor Drive, To be presented at the 6th International Symposium of Electric and Magnetic Field, Aachen, Germany, Oct. 6-9, 2003.

107.       S.M.A. Cruz, H.A. Toliyat, and A.J.M. Cardoso, “DSP Implementation of the Multiple Reference Frame Theory for the Diagnosis of Stator Faults in a DTC Induction Motor Drive,” Proceedings of the IEEE SDEMPE’03, Atlanta, GA, Aug. 24-26, 2003, pp. 223-228.

108.       S.K. Jeong, Z.G. Lee, P. Niazi, and H.A. Toliyat, “Sensorless Control of Induction Motors with Simultaneous on-line Estimation of Rotor Resistance and Speed Based on the Feedforward Torque Control Scheme, Proceedings of the International Electric Machines and Drives Conference (IEMDC’03), Madison, WI, June 1-4, 2003, pp. 1837-1842.

109.       R. Khopkar, S.M. Madani, M. Haji, and H.A. Toliyat, “A Low-Cost Motor Drive using Buck-Boost Converter for Residential and Commercial Applications, Proceedings of the International Electric Machines and Drives Conference (IEMDC’03), Madison, WI, June 1-4, 2003, pp. 1251-1257.

110.       M.T. Abolhassani, H.A. Toliyat, and P. Enjeti, “Stator field oriented control of an Integrated Doubly Field Induction Generator for Wind Energy application,” Proceedings of the International Electric Machines and Drives Conference (IEMDC’03), Madison, WI, June 1-4, 2003, pp.461-467.

111.       M. Jones, E. Levi, S.N. Vukosavic, and H.A. Toliyat, “Independent Vector Control of a Seven-Phase Three-Motor Drive System Supplied from a Single Voltage Source Inverter,” Proceedings of the 2003, Power Electronics Specialist Conference (PESC’03), Acapulco, Mexico, June 15-19, 2003, pp. 1865-1870.

112.       E. Levi, M. Jones, S.N. Vukosavic, and H.A. Toliyat, “A Novel Concept of a Multiphase Multi-motor Vector Controlled Drive System Supplied from a Single Voltage Source Inverter,” Proceedings of the European Power Electronics (EPE’03) Conference, Toulouse, France, Sept. 2-4, 2003

113.       H.A. Toliyat, and N.H. Qahtany, “The Influence of High Order Phases on Induction Machine Parameters and Performance,” Proceedings of the First GCC Industrial Electrical & Electronics Conference, Manama, Bahrain, May 13-14, 2003.

114.       L. Hao, and H.A. Toliyat, “BLDC Full-Speed Operation Using Hybrid Sliding Mode Observer,” Proceedings of the IEEE 2003 Applied Power Electronics Conference and Exposition (APEC 2003), February 9-13, 2003, Miami Beach, FL, pp. 286-293.

115.       S.M.R. Rafiei, R. Ghazi, R. Asgharian, M. Barakati, and H.A. Toliyat, “Robust Control of dc/dc PWM Converters: A Comparison of , , and Fuzzy Logic Based Approaches,” Proceedings of the IEEE 2003 Control Applications Conference, June 23-25, 2003, Vol. 1, pp. 603-608.

116.       S.M. Madani, L. Hao, and H.A. Toliyat, “Four-Switch BLDC Motor Drive with Active Power Factor Correction,” Proceedings of the IEEE Industrial Electronics Conference (IECON’02), Nov. 5-8, 2002, Seville, Spain, pp. 579-584.

117.       S.M. Madani, H.A. Toliyat, L.E. Olson, “Determining the Electromagnetic Characteristics of a Slow Release Actuator,” Proceedings of the IEEE Industrial Electronics Conference (IECON’02), Nov. 5-8, 2002, Seville, Spain, pp. 2768-2772.

118.       S. Kwak, R. Dabbousi, and H.A. Toliyat, “An Instantaneous Compensation Technique for Supply Disturbances in Direct Frequency Converters,” Proceedings of the IEEE Industrial Electronics Conference (IECON’02), Nov. 5-8, 2002, Seville, Spain, pp. 956-960.

119.       S. Kwak, and H.A. Toliyat, “A Matrix Converter for Fault-tolerant Strategies and Two-phase Machine Drives,” Proceedings of the IEEE Industrial Electronics Conference (IECON’02), Nov. 5-8, 2002, Seville, Spain, pp. 251-256.

120.       L. Parsa, L. Hao, and H.A. Toliyat, “Optimization of Average and Cogging Torque in 3-Phase IPM Motor Drives,” Proceedings of the IEEE-IAS 2002 Annual Meeting, Pittsburgh, PA, Oct. 13-18, 2002, pp. 417-424.

121.       T. Gopalarathnam, and H.A. Toliyat, “A High Power Factor Converter Topology for Switched Reluctance Motor Drives,” Proceedings of the IEEE-IAS 2002 Annual Meeting, Pittsburgh, PA, Oct. 13-18, 2002.

122.       S. Ahmed, M. Haji, and H.A. Toliyat, “A System Level Solution for Power Electronic Measurements,” Proceedings of the IEEE-IAS 2002 Annual Meeting, Pittsburgh, PA, Oct. 13-18, 2002, pp. 307-311.

123.       K. Abbaszadeh, M. Rahimian, H.A. Toliyat, and L.E. Olson, “Rail Defect Diagnosis using Wavelet Packet Decomposition,” Proceedings of the IEEE-IAS 2002 Annual Meeting, Pittsburgh, PA, Oct. 13-18, 2002, pp. 478-484.

124.       H. Meshgin-Kelk, J. Milimonfared, and H.A. Toliyat, “Interbar Currents and Axial Fluxes in Healthy and Faulty Induction Motors,” Proceedings of the IEEE-IAS 2002 Annual Meeting, Pittsburgh, PA, Oct. 13-18, 2002.

125.       S. Nandi, R. Bharadwaj, and H.A. Toliyat, “Mixed Eccentricity in Three Phase Induction Machines: Analysis, Simulation, and Experiments,” Proceedings of the IEEE-IAS 2002 Annual Meeting, Pittsburgh, PA, Oct. 13-18, 2002.

126.       L. Hao, M. Madani, H.A. Toliyat, A Low-Cost Four-Switch BLDC Motor Drive with Active Power Factor Correction, Proceedings of the TI Developer Conference, Houston, TX, August 6-8, 2002.

127.       S. Ahmed, W. Choi, H.A. Toliyat, and P.N. Enjeti, “Characterization of Non-sinusoidal Measurement Station Component Requirements and Errors,” Proceedings of the 2002 ASHRAE Annual Meeting, June 22-26, Hawaii.

128.       H.A. Toliyat, S. Ahmed, W. Choi, and P.N. Enjeti, “Instrument Selection Criteria for Non-sinusoidal Power Measurements,” Proceedings of the 2002 ASHRAE Annual Meeting, June 22-26, Hawaii.

129.       N. Qahtani, and H.A. Toliyat, “Finite Element Analysis of a Concentrated Winding Multi-Phase Induction Machine,” Proceedings of the 15th International Conference on Electrical Machines, August 25-28, 2002, Bruges, Belgium.

130.       L. Parsa, and H.A. Toliyat, “Minimizing the Cogging Torque and Maximizing the Average Torque of Three-Phase IPM Motor Drives,” Proceedings of the 15th International Conference on Electrical Machines, August 25-28, 2002, Bruges, Belgium.

131.       L. Parsa, and H.A. Toliyat, “A New Five-Phase Brushless Permanent Magnet Motor for Vehicle Application,” Proceedings of the 2002 Future Car Congress, June 3-5, 2002, Arlington, VA.

132.       M. Haji, S. Ahmed, and H.A. Toliyat, “Induction Machines Performance Evaluator-Torque Speed Estimation and Rotor Fault Diagnosis,” Proceedings of the 2002 Applied Power Electronics Conference and Exposition (APEC 2002), March 10-14, 2002, Dallas, TX, pp. 764-769.

133.       R. Shi, and H.A. Toliyat, “Vector Control of Five-Phase Synchronous Reluctance Motor with Space Vector Pulse Width Modulation (SVPWM) for Minimum Switching Losses,” Proceedings of the 2002 Applied Power Electronics Conference and Exposition (APEC 2002), March 10-14, 2002, Dallas, TX, pp. 57-63.

134.       H. Xu, and H.A. Toliyat, “Resilient Current Control of Five-Phase Induction Motor under Asymmetrical Fault Conditions,” Proceedings of the 2002 Applied Power Electronics Conference and Exposition (APEC 2002), March 10-14, 2002, Dallas, TX, pp. 64-71.

135.       J. Guzinski, H. Abu-Rub, and H.A. Toliyat, “An Advanced Low-Cost Sensorless Induction Motor Drive,” Proceedings of the 2002 Applied Power Electronics Conference and Exposition (APEC 2002), March 10-14, 2002, Dallas, TX, 802-808.

136.       M. Haji, and H.A. Toliyat, “Pattern Recognition – A Technique for Induction Machines Rotor Broken Bar Detections,” IEEE Power Engineering Society Winter Meeting, Jan. 27-31, 2002, New York, NY.

137.       S.M.R. Rafiei, R. Ghazi, and H.A. Toliyat, “Application of Neural Networks Based Real Time and Optimal Control of Active Power Filters Under Three-Phase Non-Sinusoidal /Unbalance Voltages,” To be presented at the 10th Iranian Conference on Electrical Engineering (ICEE-2002), Tabriz University, Tabriz, Iran, 2002.

138.       H. Abu-Rub, S. Ahmed, and H.A. Toliyat, “Sensorless Torque Control of AC Induction Motors,” Proceedings of the IEEE Industrial Electronics Conference, Denver, CO., Nov. 29-Dec. 2, 2001, pp. 630-634.

139.       H. Abu-Rub, J. Guzinski, Z. Krzeminski, and H.A. Toliyat, “Predictive Current Control of Voltage Source Inverters,” Proceedings of the IEEE Industrial Electronics Conference, Denver, CO., Nov. 29-Dec. 2, 2001, pp. 1195-1200.

140.       M. Raina, and H.A. Toliyat, “Parameter Estimation of Induction Motors – A Review and Status Report,” Proceedings of the IEEE Industrial Electronics Conference, Denver, CO., Nov. 29-Dec. 2, 2001, pp. 1327-1332.

141.       M. Haji, and H.A. Toliyat, “Rotor Eccentricity Fault Detection of a DC Motor, Proceedings of the IEEE Industrial Electronics Conference, Denver, CO., Nov. 29-Dec. 2, 2001, pp. 591-596.

142.       T. Gopalarathnam, and H.A. Toliyat, “Input Current Shaping in BLDC Motor Drives Using a New Converter Topology,” Proceedings of the IEEE Industrial Electronics Conference, Denver, CO., Nov. 29-Dec.2, 2001, pp. 1441-1444.

143.       K. Abbaszadeh, J. Milimonfared, H.A. Toliyat, and M. Haji, “Broken Bar Detection in Induction Motor via Wavelet Transformation,” Proceedings of the IEEE Industrial Electronics Conference, Denver, CO., Nov. 29-Dec.2, 2001, pp. 95-99.

144.       M.T. Abolhassani, P. Enjeti, and H.A. Toliyat, “Harmonic Compensation using Advanced Electric Machines,” Proceedings of the IEEE Industrial Electronics Conference, Denver, CO., Nov. 29-Dec.2, 2001, pp. 1388-1393.

145.       L. Parsa, and H.A. Toliyat, “A New Five-Phase Brushless Permanent Magnet Motor for High Power Applications,” Proceedings of the 2001 North American Power Symposium, College Station, TX, Oct. 15-16, 2001, pp. 125-131.

146.       R. Shi, and H.A. Toliyat, “Torque Production of Five-Phase Synchronous Reluctance Motor with Two Flux Barriers per Pole Rotor under 3rd Harmonic Current Injection,” Proceedings of the 2001 North American Power Symposium, College Station, TX, Oct. 15-16, 2001, pp. 136-143.

147.       S.M. Madani, and H.A. Toliyat, “A Novel Power Factor Correction (PFC) Technique for Six-Switch AC Motor Drive,” Proceedings of the 2001 North American Power Symposium, College Station, TX, Oct. 15-16, 2001, pp. 107-111.

148.       S. Ahmed, and H.A. Toliyat, “A Novel DSP-Based Speed Sensorless Performance Evaluation Tool for Induction Motors,” Proceedings of the IEEE-IAS 2001 Annual Meeting, Chicago, IL, Sept. 30 - Oct. 5, 2001.

149.       M. Haji, and H.A. Toliyat, “Pattern Recognition – A Technique for Induction Machines Rotor Fault Detections, Proceedings of the IEEE-IAS 2001 Annual Meeting, Chicago, IL, Sept. 30 - Oct. 5, 2001.

150.       J. Hur, J.P. Hong, H.A. Toliyat, and D.S. Hyun, “3D Dynamic Transient Analysis of Induction Machines using New Equivalent Magnetic Circuit Network Method,” Proceedings of IEEE-Compumag 2001, Evian, France, July 2001.

151.       R. Shi, H.A. Toliyat, and A. El-Antably, “Field Oriented Control of Five-Phase Synchronous Reluctance Motor Drive with Flexible 3rd Harmonic Current Injection for High Specific Torque,” Proceedings of the IEEE-IAS 2001 Annual Meeting, Chicago, IL, Sept. 30 - Oct. 5, 2001.

152.       S. Nandi, S. Ahmed, and H.A. Toliyat, and R.M. Bharadwaj, “ Selection Criteria of Induction Machines for Speed-Sensorless Drives Applications,” Proceedings of the IEEE-IAS 2001 Annual Meeting, Chicago, IL, Sept. 30 - Oct. 5, 2001.

153.       S. Ahmed, and H.A. Toliyat, “A Novel Speed Sensorless Technique for Obtaining the Speed-Torque Characteristics of Induction Motors for Commissioning,” Proceedings of the IEEE-IEMDC’01, Boston, MA, June 17-20, 2001, pp. 905-910.

154.       A. Ba-Thunya, R. Khopkar, and H.A. Toliyat, “Single-Phase Induction Motor Drives – A Literature Survey,” Proceedings of the IEEE-IEMDC’01, Boston, MA, June 17-20, 2001, pp. 911-916.

155.       H. Xu, H.A. Toliyat, and L.J. Peterson, “Five-Phase Induction Motor Drives with DSP-Based Control Systems,” Proceedings of the IEEE-IEMDC’01, Boston, MA, June 17-20, 2001, pp. 304-309.

156.       M. Abolhassani, H.A. Toliyat, and P. Enjeti, “An Electromechanical Active Harmonic Filter,” Proceedings of the IEEE-IEMDC’01, Boston, MA, June 17-20, 2001, pp. 349-355.

157.       M. Haji, and H.A. Toliyat, “Pattern Recognition – A Technique for Induction Machines Rotor Fault Detections,” Proceedings of the IEEE-IEMDC’01, Boston, MA, June 17-20, 2001, pp. 899-904.

158.       S.P. Waikar, H.A. Toliyat, A.S. Ba-Thunya, Z. Zhang, and J.C. Moreira, “Low-cost Solution for Brushless DC Motor Drive System using Load Commutated Inverter,” Proceedings of the 52nd Annual International Appliance Technical Conference and Tabletop Exhibition, Columbus, OH, March 26-28, 2001, pp. 245-255.

159.       R. Shi, and H.A. Toliyat, and A. El-Antably, “A DSP-Based Direct Torque Control of Five-Phase Synchronous Reluctance Motor Drive, Proceedings of the 2001 Applied Power Electronics Conference and Exposition (APEC 2001), March 4-8, 2001, Anaheim, CA, pp. 1077-1082.

160.       S.P. Waikar, H.A. Toliyat, A.S. Ba-Thunya, J.C. Moreira, and Z. Zhang, “A Novel Thyristor-Based Brushless DC Motor Drive for Low Cost Applications, Proceedings of the 2001 Applied Power Electronics Conference and Exposition (APEC 2001), March 4-8, 2001, Anaheim, CA, pp. 434-439

161.       H. Xu, H.A. Toliyat, and L.J. Petersen, “Rotor Field Oriented Control of Five-Phase Induction Motor with the Combined Fundamental plus Third Harmonic Currents,” Proceedings of the 2001 Applied Power Electronics Conference and Exposition (APEC 2001), March 4-8, 2001, Anaheim, CA, pp. 392-398.

162.       H. Xu, and H.A. Toliyat, L.J. Peterson, “Modeling and Control of Five-Phase Induction Motor under Asymmetrical Fault Conditions,” Proceedings of the Third Naval Symposium on Electric Machines, Philadelphia, December 4-7, 2000.

163.       H.A. Toliyat, R. Shi, and H. Xu, "A DSP-based Vector Control of Five-phase Synchronous Reluctance Motor," Proceedings of the IEEE-IAS 2000 Annual Meeting, Rome, Italy, Oct. 8-12, 2000, pp. 1759-1765.

164.       T. Gopalarathnam, H.A. Toliyat, and J.C. Moreira, "Multi-Phase Fault-Tolerant Brushless DC Motor Drives," Proceedings of the IEEE-IAS 2000 Annual Meeting, Rome, Italy, Oct. 8-12, 2000, pp. 1683-1688.

165.       S. Nandi, and H.A. Toliyat, "A Novel Frequency Domain Based Technique to Detect Incipient Stator Inter-Turn Faults in Induction Machines," Proceedings of the IEEE-IAS 2000 Annual Meeting, Rome, Italy, Oct. 8-12, 2000, pp. 367-374.

166.       H. Xu, and H.A. Toliyat, “Implementing Rotor Field Oriented Control and Direct Torque Control of Five-Phase Induction Motor Using TMS320C32 DSP, Proceedings of the Texas Instrument DSPS Fest’00, Aug. 2-4, 2000, Houston, TX.

167.       J. Hur, H.A. Toliyat, and J. Hong, "3D Time-Stepping Analysis of Induction Motor by New 3-D Equivalent Magnetic Circuit Network Method," Proceedings of the IEEE-CEFC'2000 Conference, Milwaukee, WI, June 4-7, 2000, pp. 463.

168.       J. Hur, H.A. Toliyat, and J. Hong, "Analysis of Eddy Current in an Asymmetrical Conductor using New 3-D Equivalent Magnetic Circuit Network Method,” Proceedings of the IEEE-CEFC'2000 Conference, Milwaukee, WI, June 4-7, 2000, pp. 199.

169.       H.A. Toliyat, and H. Xu, “DSP-Based Direct Torque Control (DTC) for Five-Phase Induction Machines,” Proceedings of the International Power Electronics Conference (IPEC 2000), Tokyo, Japan, Apr. 3-7, 2000, pp. 1195-1200.

170.       H.A. Toliyat, and H. Xu, “A Novel Direct Torque Control (DTC) Method for Five-Phase Induction Machines,” Proceedings of the 2000 Applied Power Electronics Conference and Exposition (APEC 2000), Feb. 6-10, 2000, New Orleans, LA, pp. 162-168.

171.       S.M.R. Rafiei, R. Ghazi, and H.A. Toliyat, “Real Time and Optimal Control of Programmable Active Power Filters for Harmonic Compensation and Power Factor Optimization in Non-Sinusoidal Line Voltages Using Neural Networks,” Proceedings of the 8th Iranian Conference on Electrical Engineering (ICEE-2000), Isfahan University of Technology, Isfahan, Iran, 2000.

172.       S.M.R. Rafiei, R. Ghazi, and H.A. Toliyat, "New and Programmable Control Strategy for Active Filters Under Non-Sinusoidal Line Voltages Using Virtual Voltages,” Proceedings of the 14th International Conference on Power Systems (PSC-99), Iran Energy Research Center, Tehran, Iran, 1999.

173.       S.M.R. Rafiei, R. Ghazi, H.A. Toliyat, “Review of Research Trends in Active Filtering for Harmonic Elimination and Power Quality Improvement,” Proceedings of 13th International Conference on Power Systems (PSC-98), Iran Energy Research Center, Tehran,  Iran, 1998.

174.       A.S. Ba-thunya, and H.A. Toliyat, “A New High Frequency Transformer Assisted ZVS Quasi-Resonant DC-Link PWM Inverter with Minimum Voltage Stress on the Switches,” Proceedings of the 25th Annual Conference of the IEEE Industrial Electronics Society (IECON’99), San Jose, CA, Nov. 29–Dec. 3, 1999, pp. 879-884.

175.       J. Mahdavi, A. Agah, A.M. Ranjbar, and H.A. Toliyat, “Extension of PWM Space Vector Technique for Multilevel Current-Controlled Voltage Source Inverters,” Proceedings of the 25th Annual Conference of the IEEE Industrial Electronics Society (IECON’99), San Jose, CA, Nov. 29–Dec. 3, 1999, pp. 583-588.

176.       R.M. Bharadwaj, A.G. Parlos, and H.A. Toliyat, “Adaptive Neural Network-Based State Filter for Induction Motor Speed Estimation,” Proceedings of the 25th Annual Conference of the IEEE Industrial Electronics Society (IECON’99), San Jose, CA, Nov. 29–Dec. 3, 1999, pp. 1283-1287.

177.       T. Gopalarathnam, S. Waikar, H.A. Toliyat, M.S. Arefeen, J.C. Moreira, “Development of Low Cost Multi-Phase Brushless Permanent Magnet (BPM) Motors with Unipolar Current Excitations,” Proceedings of the IEEE-IAS 1999 Annual Meeting, Phoenix, AZ, Oct. 3-7, 1999, pp. 173-179.

178.       S. Nandi, H.A. Toliyat, “Condition Monitoring and Fault Diagnosis of Electrical Machines- A Review,” Proceedings of the IEEE-IAS 1999 Annual Meeting, Phoenix, AZ, Oct. 3-7, 1999, pp. 197-204.

179.       S. Nandi, H.A. Toliyat, “Study of Three Phase Induction Motors with Incipient Rotor Cage Faults under Different Supply Conditions,” Proceedings of the IEEE-IAS 1999 Annual Meeting, Phoenix, AZ, Oct. 3-7, 1999, pp. 1922-1928.

180.       S. Nandi, R. Bharadwaj, H.A. Toliyat, A.G. Parlos,” Simulation of a Three Phase Induction Motor with Incipient Rotor Cage Faults,” Proceedings of the 1999 IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED’99), Gijon, Spain, Sept. 1-3, 1999, pp. 389-393.

181.       R. Bharadwaj, A.G. Parlos, H.A. Toliyat, S. Nandi, “A Neural Network-Based Speed Filter for Induction Motors: Adapting to Motor Condition Changes,” Proceedings of the 1999 IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED’99), Gijon, Spain, Sept. 1-3, 1999, pp. 359-362.

182.       H.A. Toliyat, and D.S. Shet, “Sensorless Operation of Surface Mount Permanent Magnet AC (PMAC) Motors, The 1999 American Control Conference (ACC’99), San Diego, CA, June 2-4, 1999. (Invited Paper)

183.       A.S. Ba-thunya, and H.A. Toliyat, “Analysis and Design for Certain Circuit Topologies of Soft-Switched Quasi-Resonance Boost and Flyback Converters,” Proceedings of the 21st International Telecommunications Energy Conference (INTELEC’99), Copenhagen, Denmark, June 6-9, 1999.

184.       A.S. Ba-thunya, and H.A. Toliyat, “High Frequency Transformer Assisted a New Passive Clamp ZVS Quasi-Resonant DC-Link PWM Inverter with Low Voltage Stress Across the Switches,” Proceedings of the 1999 Power Electronics Specialists Conference (PESC’99), Charleston, South Carolina, June 27-July 1, 1999, pp. 981-986.

185.       J. Mahdavi, Sh. Kaboli, and H.A. Toliyat, “Conducted Electromagnetic Emissions in Unity Power Factor AC/DC Converters: Comparison Between PWM and RPWM Techniques,” Proceedings of the 1999 Power Electronics Specialists Conference (PESC’99), Charleston, South Carolina, June 27-July 1, 1999, pp. 881-885.

186.       R.M. Bharadwaj, A.G. Parlos, H.A. Toliyat, S.K. Menon, “A Neural Network-Based Speed Filter for Induction Motors: Adaption to Motor Load Changes,” Proceedings of the 1999 International Joint Conference on Neural Networks (IJCN’99), July 10-16, Washington DC.

187.       S. Nandi, H.A. Toliyat, “Fault Diagnosis of Electrical Machines-A Review,” Proceedings of the IEEE-IEMDC’99, Seattle, WA, May 9-12, 1999, pp. 219-221.

188.       D.S. Shet, H.A. Toliyat, T.A. Nondahl, “Position Sensorless Control of Surface Mount Permanent Magnet AC (PMAC) Motors at Low Speeds,” Proceedings of the 1999 Applied Power Electronics Conference (APEC’99), Dallas, Texas, March 14-18, pp. 1219-1225.

189.       S. Waikar, H.A. Toliyat, J.C. Moreira, “Evaluation Of Multiphase Brushless DC Permanent Magnet (BPM) Motors Using Finite Element Method and Experiments,” Proceedings of the 1999 Applied Power Electronics Conference (APEC’99), Dallas, Texas, March 14-18, pp. 396-402.

190.       S. Waikar, H.A. Toliyat, J.C. Moreira, “A Low Cost Brushless Permanent Magnet (BPM) Motor Drive System Using TMS320F240”, Texas Instrument DSPS Fest’99, Aug. 4-6, 1999, Houston, TX.

191.       T. Gopalarathnam, S. Nandi, H.A. Toliyat, “Feasibility Study to Include Fault Diagnosis as a Housekeeping Function for Motor Drives Applications using TMS320F240 DSP, Texas Instrument DSPS Fest’99, Aug. 4-6, 1999, Houston, TX.

192.       S. Nandi, H.A. Toliyat, “Detection of Rotor Slot and Other Eccentricity Related Harmonics in a Three Phase Induction Motor with Different Rotor Cages,” 2nd IEEE International Conference on Power Electronics, Drives, and Energy Systems for Industrial Growth, PEDES’98, Perth, Western Australia, Nov. 30-Dec. 3, 1998, 135-140.

193.       S. Nandi, R. Bharadwaj, H.A. Toliyat, A.G. Parlos, “Performance Analysis of a Three Phase Induction Motor under Incipient Mixed Eccentricity Condition,” 2nd IEEE International Conference on Power Electronics, Drives, and Energy Systems for Industrial Growth, PEDES’98, Perth, Western Australia, Nov. 30-Dec. 3, 1998, pp. 123-128.

194.       J. Milimonfared, H. Meshgin Kelk, A. Der Minassians, S. Nandi, and H.A. Toliyat, “A Novel Approach for Broken Rotor Bar Detection in Cage Induction Motors,” Proceedings of the IEEE-IAS 1998 Annual Meeting, St. Louis, MO, Oct. 12-16, 1998, pp. 286-290.

195.       D.S. Shet, H.A. Toliyat, N. Kehtarnavaz, I. Panahi, M.S. Arefeen, “Position Sensor-less Control of Surface Mount Permanent Magnet AC (PMAC) Motors using DSP,” Texas Instrument DSPS Fest’98, Aug. 6-8, 1998, Houston, TX.

196.       N. Sultana, D. Shet, H.A. Toliyat, J.C. Moreira, “Brushless Permanent Magnet Motor Drive System using Load Commutated Inverter, Proceedings of the IEEE-APEC’98, Anaheim, CA, Feb. 15-19, 1998, pp. 69-74.

197.       S.M.R. Rafiei, R. Ghazi, H.A. Toliyat, “Modeling and Digital Control of Current Regulated PWM with Reduced Sampling Frequency-Experimental Results,” (in Persian), Proceedings of Sixth Iranian Conference on Electrical Engineering (ICEE’98), Khajeh Nasir Toosi University, Tehran, Iran, 1998.

198.       S.M.R. Rafiei, R. Ghazi, H.A. Toliyat, “Design and Fabrication of Active Power Filter using Narrow-Band IIR Digital Filter with Modified Phase Characteristics,” (in Persian), Proceedings of Sixth Iranian Conference on Electrical Engineering (ICEE’98), Khajeh Nasir Toosi University, Tehran, Iran, 1998.

199.       S. Nandi, H.A. Toliyat, “Performance Analysis of a Three Phase Induction Motor under Abnormal Operating Conditions,” Proceedings of the IEEE-SDEMPED’97 Conference, Carry-le-Rouet, France, Sep. 1-3, 1997, pp. 54-59.

200.       H.A. Toliyat, N. Al-Nuaim, “Simulation and Detection of Dynamic Air-Gap Eccentricity in Salient Pole Synchronous Machines,” Proceedings of the IEEE-IAS 1997 Annual Meeting, New Orleans, LA, Oct. 5-9, 1997, pp. 255-262.

201.       S. Nandi, H.A. Toliyat, A.G. Parlos, “Performance Analysis of a Single Phase Induction Motor under Eccentric Condition,” Proceedings of the IEEE-IAS 1997 Annual Meeting, New Orleans, LA, Oct. 5-9, 1997, pp. 174-181.

202.       H.A. Toliyat, G. Suresh , and A. Abur, “Simulation of Voltage Stress on the Inverter Fed Induction Motor Windings Supplied through Feeder Cable,” Proceedings of the IEEE-IAS 1997 Annual Meeting, New Orleans, LA, Oct. 5-9, 1997, pp. 143-150.

203.       G. Suresh, H.A. Toliyat, and A. Abur, “Analysis of the Effect of Feeder Cable on the Stator Winding Voltage Stress in a PWM Induction Motor Drive,” Proceedings of the Electrical Insulation Conference ’97, Chicago, IL, Sept. 22-25, 1997, pp. 407-412.

204.       J. Mahdavi, A. Emadi, and H.A. Toliyat, “Application of State Space Averaging Method to Sliding Mode Control of PWM DC/DC Converters,” Proceedings of the IEEE-IAS 1997 Annual Meeting, New Orleans, LA, Oct. 5-9, 1997, pp. 820-827.

205.       D.S. Shet, H.A. Toliyat, “On-Line Speed Estimation of Induction Motors,” Texas Instrument DSPS Fest’97, July 31-Aug. 2, 1997, Houston, TX, pp. 98-101.

206.       N.A. Al-Nuaim, and H.A. Toliyat, “A Novel Method for Modeling Dynamic Air-Gap Eccentricity in Synchronous Machines Based on Modified Winding Function Theory,” Paper # PE-718-EC-0-05-1997, IEEE-PES 1997 Summer Meeting, Berlin, Germany.

207.       S.M.R. Rafiei, R. Ghazi, H.A. Toliyat, “Modeling and Digital Control of Current Regulated PWM with Reduced Sampling Frequency-Theory,” (in Persian), Proceedings of Fifth Iranian Conference on Electrical Engineering (ICEE’97), Sharif University of Tehran, Tehran, Iran, May 7-9, 1997.

208.       N.A. Al-Nuaim, and H.A. Toliyat, “A Method for Dynamic Simulation and Detection of Dynamic Air-Gap Eccentricity in Synchronous Machines,” Proceedings of the 1997 IEEE International Electric Machines and Drives Conference (IEEE-IEMDC’97), Milwaukee, WI, May 18-21, 1997, pp. MA2-5.1 : MA2-5.3.

209.       G. Suresh, H. A. Toliyat, D.A. Rendusara, and P.N. Enjeti, "Predicting the Transient Effects of PWM Voltage Waveform on the Stator Windings of a Random Wound Induction Motors, " Proceedings of the 1997 IEEE 12th Applied Power Electronics Conference (APEC’97), Atlanta, Georgia, Feb. 23-27, pp. 135-141.

210.       K.M. Rahman and H.A. Toliyat, “Sensorless Operation of Permanent Magnet AC Motors (PMAC) with Modified Stator Windings, ” Proceedings of the 1996 IEEE Industry Applications Annual Meeting, San Diego, California, Oct. 6-10, pp. 326-333.

211.       J.P. Johnson, A.V. Rajarathnam, H.A. Toliyat, S. Gopalakrishnan, and B. Fahimi, “Torque Optimization for a SRM using Winding Function Theory with a Gap Dividing Surface,” Proceedings of the 1996 IEEE Industry Applications Society Annual Meeting, San Diego, California, Oct. 6-10, pp. 753-760.

212.       H.A. Toliyat, ”Analysis and Simulation of Multi Phase Variable Speed Induction Motor Drives Under Asymmetrical Connections,” Proceedings of the 1996 IEEE 11th Applied Power Electronics Conference (APEC’96), March 3-7, San Jose, California, pp. 586-592.

213.       M. Ehsani, K.M. Rahman, H. A. Toliyat, “Propulsion System Design of Electric Vehicles,” Proceedings of the 1996 IEEE IECON, 22nd International Conference on Industrial Electronics, Control, and Instrumentation, Taipei, Taiwan, August 5-9, 1996, pp. 7-13. (Invited Paper).

214.       H.A. Toliyat, M.S. Arefeen, A. G. Parlos, “A Method for Dynamic Simulation and Detection of Air-Gap Eccentricity in Induction Machines,” IEEE-IAS Annual Meeting Conference, Orlando, Florida, 1995, pp. 629-636.

215.       H.A. Toliyat, J. Sadeh, and R. Ghazi, “Design of Augmented Fuzzy Logic Power System Stabilizers to Enhance Power System Stability,” IEEE-PES Summer Meeting Conference, Portland, Oregon, Paper # 95SM446-5EC, July 23-27, 1995.

216.       H.A. Toliyat, M.S. Arefeen, K.M. Rahman, and M. Ehsani, “Rotor Time Constant Updating Scheme for a Rotor Flux Oriented Induction Motor Drive,” Proceedings of the IEEE 1995 Power Electronics Specialist Conference (PESC’95), Atlanta, Georgia, June 18-22, pp. 1302-1306.

217.       R. Ghazi, H. A. Toliyat, S. M. R. Rafiei, “A Fuzzy-Genetic Pulse Width Modulation for Active Power Filters,” Proceedings of the IEEE Stockholm Power Tech, Stockholm, Sweden, June 18-22, 1995, pp. 267-272.

218.       L. Gubbala, A. Von Jouanne, P. Enjeti, C. Singh, H.A. Toliyat, “Voltage Distribution in the Windings of an ac Motor Subjected to Pulse Width Modulation (PWM) Input,” Proceedings of the IEEE 1995 Power Electronics Specialist Conference, Atlanta, GA, June 18-22, pp. 579-585.

219.       H.A. Toliyat, K.M. Rahman, and M. Ehsani, “Electric Machines in Electric and Hybrid Vehicle Applications,” Proceedings of the 1995 International Conference on Power Electronics, Oct. 10-14, Seoul, Korea, pp. 627-635.

220.       M.M. Rahimian, H.A. Toliyat, T.A. Lipo, "A Comprehensive Analysis of a Locomotive Traction System Including Main Alternator, Bridge Rectifiers, Contactor, and DC Traction Motors," Proceedings of the 1995 IEEE 10th Applied Power Electronics Conference (APEC’95), March 5-9, Dallas, Texas, 1995, pp. 118-124.

221.       S.M.R. Rafiei, H.A. Toliyat, R. Ghazi, “A New Method for Harmonic Identification Using Digital Filters,” (in Persian), Proceedings of the Third Iranian Conference on Electrical Engineering (ICEE’95), University of Science and Technology, Tehran, Iran, May 15-18, 1995, pp. 331-338.

222.       R. Ghazi, H.A. Toliyat, S.M.R. Rafiei, “A Simple Fuzzy Logic Based Modulator for Sinusoidal PWM Inverters,” Proceedings of the Third Iranian Conference on Electrical Engineering (ICEE’95), University of Science and Technology, Tehran, Iran, May 15-18, 1995, 29-35.

223.       H. A. Toliyat, and T. A. Lipo, "Transient Analysis of Cage Induction Machines Under Stator, Rotor Bar and End Ring Faults," IEEE-PES Summer Meeting Conference, Paper # 94SM361-6EC, July 1994.

224.       H.A. Toliyat, and T.A. Lipo, "Analysis of Concentrated Winding Induction Machines for Adjustable Speed Drive Applications-Experimental Results," IEEE-PES Winter Meeting Conference, Paper # 94WM028-1EC, February 1994.

225.       H.A. Toliyat, and S.M.R. Rafiei, “Instability and Chaos in Buck Converters- Two Dimensional Mapping,” Proceedings of the Second Iranian Conference on Electrical Engineering (ICEE’94), Tarbiat Modaress University, Tehran, Iran, 1995.

226.       S.M.R. Rafiei, H.A. Toliyat, and R. Ghazi, “A Fuzzy Pulse Width Modulator for Power Converters,” Proceedings of the International Conference on Application of Fuzzy Systems (ICAFS’94), University of Tabriz, Tabriz, Iran, Oct. 14-17, 1994, pp. 101-110.

227.       K. Rasul-Zadeh, and H.A. Toliyat, “Design and Fabrication of Induction Generators and Corresponding Static Converters for Wind Power Plants,” (in Persian), Proceedings of the 8th International Power System Conference (PSC’ 95), Tehran, Iran.

228.       H.A. Toliyat, and J. Sadeh, “An Improved Fuzzy Logic Based PSS for Power System Stability Enhancement,” Proceedings of the 9th International Power System Conference (PSC’94), St.- Petersburg State Technical University, St. Petersburg, Russia, 1994.

229.       X. Luo, Y. Liao, H.A. Toliyat, A. El-Antably, and T.A. Lipo, "Multiple Coupled Circuit Modeling of Induction Machines," IEEE-IAS Annual Meeting Conference, Toronto, Ontario, Canada, Oct. 2-8, 1993, pp. 203-210.

230.       H.A. Toliyat, and M.M. Rahimian, "Transient and Steady State Analysis of Induction Machines Under Internal Faults," Research Report (in Persian), Department of Electrical Engineering, Ferdowsi University-Mashhad, Mashhad, Iran, June 1993.

231.       H.A. Toliyat, M.M. Rahimian, and T.A. Lipo, "Analysis and Modeling of Five Phase Converters for Adjustable Speed Drive Applications," Proceedings of the 5th European Conference on Power Electronics and Applications (EPE'93), Sept. 13-16, 1993, pp. 194-199.

232.       H.A. Toliyat, A. Hosseini, "Parameter Estimation Algorithm Using Spectral Analysis for Vector Controlled Induction Motor Drives," Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE’93), Budapest, Hungry, June 1-3, 1993, pp. 90-95.

233.       H.A. Toliyat, and M.M. Rahimian, "Transient Analysis of Induction Machines Under Internal Faults," Proceedings of the First Iranian Conference on Electrical Engineering (ICEE’93), Amir-Kabir University of Technology, Tehran, Iran, May 18-21, 1993.

234.       H.A. Toliyat, and M.R. Rafiei, "Analysis and Compensation of Nonlinear Systems in Power Electronics," (in Persian), Proceedings of the First Iranian Conference on Electrical Engineering (ICEE’93), Amir-Kabir University of technology, Tehran, Iran, May 18-21, 1993.

235.       H.A. Toliyat, M.M. Rahimian, S. Bhattacharya, and T.A. Lipo, "Transient Analysis of Induction Machines Under Internal Faults Using Winding Functions," Proceedings of the Third International Conference on Electrical Rotating Machines-ELROMA’92, Bombay, India, Jan. 15-16, 1992, Session IA, Paper #8.

236.       H.A. Toliyat, M.M. Rahimian, and T.A. Lipo, "dq Modeling of Five Phase Synchronous Reluctance Machines Including Third Harmonic of Air-Gap MMF," Proceedings of the IEEE-IAS Annual Meeting Conference, October 1991, pp. 231-237.

237.       H.A. Toliyat, T.A. Lipo, and J.C. White, "Analysis of a Concentrated Winding Induction Machine for Adjustable Speed Drive Applications- part I (Motor Analysis)," IEEE-PES Winter Meeting, 1991.

238.       H.A. Toliyat, T.A. Lipo, and J.C. White, "Analysis of a Concentrated Winding Induction Machine for Adjustable Speed Drive Applications- part II (Motor Design and Performance)," IEEE-PES Winter Meeting, 1991.

239.       H.A. Toliyat, L.Y. Xue, and T.A. Lipo, "A Five Phase Reluctance Motor with High Specific Torque," IEEE-IAS Annual Meeting Conference, October 1990, pp. 207-213.

240.       M.A. Choudhry, and H.A. Toliyat, "Design of Decentralized Modulation Controllers in a Multiterminal AC/DC System using Dynamic Compensators," Proceedings of the North American Power Symposium, Ithaca, New York, Oct. 13-14, 1986, pp. 239-249.


Back to top

Graduate Students Supervised or under Supervision:

Ph.D. Degree

1.              Yateendra Deshpande, Ph.D. student.

2.              Siavash Pakdelian, Ph.D. student.

3.              Babak Farhangi, Ph.D. student.

4.              Seungdeog Choi, Ph.D. student.

5.              Mahshid Amirabadi, Ph.D. student.

6.              Behrooz Nikbakhtan, Ph.D. student.

7.              Robert Vartanian, Ph.D. student.

8.              Nicolas Frank, Control of Flywheel Energy Storage Systems, Ph.D. student.

9.              Steven Campbell, Acoustic Noise of Electric Machines, Ph.D. student.

10.          Paul S. Moses, Ph.D. student, Curtin University, Perth, Australia, Co-chair with Dr. M. Masoum.

11.          Mohammad B. Ebrahimi, Ph.D. student, University of Tehran, Tehran, Iran, Co-chair with Dr. J. Faiz.

12.          Jeihoon Baek, Robust Generator System using PM Assisted Synchronous Reluctance Generator with Current-Fed Drive, Ph.D. Dissertation, Texas A&M University, College Station, TX, December 2009.

13.          Salman Talebi, Advanced High-Speed Flywheel Energy Storage Systems for Pulsed Power Applications, Ph.D. Dissertation, Texas A&M University, College Station. TX, December 2008.

14.          Salih Baris Ozturk, Direct Torque Control of Permanent Magnet Synchronous Motors with Non-Sinusoidal Back-EMF, Ph.D. Dissertation, Texas A&M University, College Station, TX, May 2008.

15.          Bilal Akin, Low Cost Motor Drive Embedded Fault Diagnosis Systems, Ph.D. Dissertation, Texas A&M University, College Station, TX, August 2007.

16.          Shehab Ahmed, Compact Harsh Environment Energy Conversion Systems, Ph.D. Dissertation, Texas A&M University, College Station, TX, May 2007.

17.          Payman Niazi, Permanent Magnet Assisted Synchronous Reluctance Motor Design and Performance Improvement, Ph.D. Dissertation, Texas A&M University, College Station, TX, December 2005.

18.          Sang-Shin Kwak, Design and Analysis of Modern Three-Phase AC/AC Power Converters for AC Drives and Utility Interface, Ph.D. Dissertation, Texas A&M University, College Station, TX, May 2005.

19.          Leila Parsa, Performance Improvement of Permanent Magnet AC Motors, Ph.D. Dissertation, Texas A&M University, College Station, TX, May 2005.

20.          Mehdi Abolhassani, Integrated Electric Alternator/Active Filter, Ph.D. Dissertation, Texas A&M University, College Station, TX, Co-chair with Dr. P. Enjeti, May 2004.

21.          Lei Hao, Permanent Magnet AC Motor High-Speed Operation using Hybrid Observers, Ph.D. Dissertation, Texas A&M University, College Station, TX, December 2002.

22.          Masoud Hajiaghajani, Fault Diagnosis of Electric Machines, Ph.D. Dissertation, Texas A&M University, College Station, TX, December 2002.

23.          Tilak Gopalarathnam, New Solutions for Improved Unipolar-Excited Brushless Motor Drive, Ph.D. Dissertation, Texas A&M University, College Station, TX, May 2002.

24.          Ruhe Shi, Vector Control of Five-Phase Synchronous Reluctance Machine with the Third Harmonic Current Injections for High Specific Torque, Ph.D. Dissertation, Texas A&M University, College Station, TX, December 2001.

25.          Huangsheng Xu, Enhanced Rotor Field Oriented Control of Five-Phase Induction Motor with the Combined Fundamental and Third Harmonic Currents, Ph.D. Dissertation, Texas A&M University, College Station, TX, December 2001.

26.          Shailesh Waikar, A Low-Cost Low-Loss Brushless Permanent Magnet Motor Drive, Ph.D. Dissertation, Texas A&M University, College Station, TX, May 2001.

27.          Karim Abbaszadeh, Ph.D. student, Amir-Kabir University of Technology, Tehran, Iran, Co-chair with Dr. J. Milimonfared.

28.          Homayoun Meshgin-Kelk, 3-D Magnetic Equivalent Circuit Modeling of Induction Machines including the Rotor Bar Faults, Ph.D. Dissertation, Amir-Kabir University of Technology, Tehran, Iran, November 2000, Co-chair with Dr. J. Milimonfared.

29.          Rajmohan Bharadwaj, Adaptive State Filtering with Neural Network for Sensorless Induction Motor Speed Estimation, Ph.D Dissertation, Texas A&M University, College Station, TX, December 2000, Co-chair with Dr. A.G. Parlos.

30.          Subhasis Nandi, Fault Analysis for Condition Monitoring of Induction Motors, Ph.D. Dissertation, Texas A&M University, College Station, TX, May 2000.

31.          Khwaja M. Rahman, Design and Control of Switched Reluctance Motor for Electric and Hybrid Electric Vehicle Application, Ph.D. Dissertation, Texas A&M University, College Station, Texas, December 1998, Co-chair with Dr. M. Ehsani.

32.          S.M.R Rafiei, An Optimal and Flexible Control Strategy for Active Filtering and Power Factor Correction under Non-Sinusoidal Line Voltage, Ph.D. Dissertation, Ferdowsi University of Mashhad, Mashhad, Iran, May 2000, Co-chair with Dr. R. Ghazi.

M.S. Degree

1.              Vivek M. Sundaram, Wind Power Plants, M.S. student.

2.              Anil Chakali, Sensorless Speed Control of Permanent Magnet-Assisted Synchronous Reluctance Motor (PMa-SynRM), M.S. Thesis, Texas A&M University, College Station, December 2009.

3.              Anand Balakrishnan, Soft Switched High Frequency AC-Link Converter, M.S. Thesis, Texas A&M University, College Station, December 2008.

4.              Salih b. Ozturk, Modeling, Simulation and Analysis of Low-Cost Direct Torque Control of PMSM using Hall-Effect Sensors, M.S. Thesis, Texas A&M University, College Station, December 2005.

5.              Rahul V. Khopkar, DC-DC Converter Current Source Fed Naturally Commutated Brushless DC Motor Drive, M.S. Thesis, Texas A&M University, College Station, August 2003.

6.              Nasser Qahtani, Non-linear Analysis of advanced High-Phase Number Induction Machines for Adjustable Speed Drive Applications, M.S. Thesis, Texas A&M University, College Station, May 2002.

7.              Rami Dabbousi, A 3-Phase AC to AC Matrix Converter using the Venturini Method, M.S. Thesis, Texas A&M University, College Station, Texas, May 2002.

8.              Tahmid Ur Rahman, Parameter estimation of vector controlled induction machine, M.S. Thesis, Texas A&M University, College Station, Texas, December 2001.

9.              Shehab Ahmed, Sensorless Performance Evaluation of Induction Motors, M.S. Thesis, Texas A&M University, College Station, Texas, December 2000.

10.          Deepak S. Shet, Sensorless Position Estimation in Sinusoidal Permanent Magnet Synchronous Motor, M.S. Thesis, Texas A&M University, College Station, Texas, December 1998.

11.          N. Sultana, Performance Analysis of Brushless Permanent Magnet Motor (BPM) using Load Commutated Inverter, M.S. Thesis, Texas A&M University, College Station, Texas, December 1997.

12.          N.A. Al-Nuaim, Performance Analysis of Synchronous Machines under Dynamic Eccentricity, M.S. Thesis, Texas A&M University, College Station, Texas, December 1996.

13.          S.M.R. Rafiei, “Active Power Filters using Fuzzy Controllers,” M.S. Thesis, Ferdowsi University of Mashhad, Mashhad, Iran, May 1995, Co-chair with Dr. R. Ghazi.

14.          N. Sargolzaei, “A Detailed Electric Machines Modeling Including Space Harmonics Using Winding Function Method,” M.S. Thesis, Ferdowsi University of Mashhad, Mashhad, Iran, January 1995.

15.          J. Sadeh, “Power System Stability Enhancement Using Fuzzy Logic Control,” M.S. Thesis, Ferdowsi University of Mashhad, Mashhad, Iran, January 1995.

16.          Hosseini, “On-line Parameter Estimation of Vector Controlled Induction Motor Drives,” M.S Thesis, Ferdowsi University of Mashhad, Mashhad, Iran, August 1993.

Back to top

Visiting Scholars

1.              Prof. Peter Omand Rasmussen, May-July 2008, Aalborg University, Denmark.

2.              Dr. Yuttana Kumsuwan, Oct. 2007- March 2008, Chiangmai University, Thailand.

3.              Dr. Jung-Chul Kim, LG Electronics, 2006-June 2008, Korea.

4.              Prof. Oh Yang, School of Electronics and Information Engineering, Cheong Ju University, March 2006-March 2007, Korea.

5.              Dr. Nam-Hun Kim, Department of Electrical Engineering, Yeungnam University, Sep. 2004-July 2007, Korea.

6.              Reginaldo Sousa Miranda, Sep. 2006-Dec. 2006, Federal University of Campina Grande, Brazil.

7.              Euzeli Cipriano dos Santos Junior, Sep. 2006- March 2007, Federal University of Campina Grande, Brazil.

8.              Dr. Chang-Ho Choi, June 2003-July 2006, POSCON Co., Korea.

9.              Isaac Soares de Freitas, Sep. 2006-Present, Federal University of Campina Grande, Brazil.

10.          Prof. Chang Seop Koh, February 2003-May 2004, Chungbuk National University, Korea.

11.          Prof. Houcine Zeroug, October 1, 2002-February 2004, Department of Electrical Engineering, Faculty of Electrical Engineering, U.S.H.B, Algiers, Algeria, Fulbright Scholar.

12.          Prof. Seok-Kwon Jeong, March 2001-February 2003, School of Mechanical Engineering, Pukyong National University, Korea

13.          Dr. Syed Mohammad Madani, October 2000-January 2003, Department of Electrical Engineering, Eindhoven University, Netherlands.

14.          Mr. Sergio Cruz, September 2002- January 2003, Department of Electrical and Computer Engineering, Coimbra, Portugal.

15.          Mr. Karim Abbaszadeh, January 2002-December 2002, Department of Electrical Engineering, Amir-Kabir University of Technology, Tehran, Iran.

16.          Prof. Haithem Abu-Rub, January 2001- December 2001, Department of Electrical Engineering, Bir Zeit University, West Bank, Israel, Fulbright Scholar.

17.          Prof. Mohab Hallouda, July 2000-September 2000, Department of Electrical Engineering, Cairo University, Egypt.

18.          Dr. Ali S. Ba-thunya, Feb. 2000-December 2000, Department of Electrical Engineering, University of Aden, Yemen.

19.          Prof. Kexin Wei, July 2000-Present, Tianjin Professional College, China.

20.          Dr. Jin Hur, July 1999-September 2000, Department of Electrical Engineering, Hanyang University, Seongdong-Gu, Korea.

21.          Mr. Homayoun K. Meshgin, January 2000-August 2000, Department of Electrical Engineering, Amir-Kabir University of Technology, Tehran, Iran.

 

Back to top

Professional Committee Memberships

1.              Member of the Technical Program Committee of the 2009 IEEE 6th International Power Electronics and Motion Control Conference (IPEMC 2009), May 17-20, 2009, Wuhan, China.

2.              Member of the International Program Committee of the IASTED International Conference on Modern Nonlinear Theory, Nov. 16-18, 2008, Orlando, FL.

3.              Member of the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) standard, SSPC41, Standard Methods of Measurement.

4.              Member of the International Steering Committee of ICEMS’2008, Oct. 17-20, 2008, Wuhan, China.

5.              Chair Industrial Power Conversion Systems Department of IEEE Industry Applications Society, 2007-present.

6.              Vice-Chair Industrial Power Conversion Systems Department of IEEE Industry Applications Society, 2006-2007.

7.              Chairman, Electric Machines Committee of IEEE Industry Application Society, 2003-2005.

8.              Member of the Organizing Committee of the 12th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2006)

9.              Member of the International Scientific Committee of 20th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM'2007), Faro, Portugal, June 13-15, 2007.

10.          Vice-chairman of Electric Machines Committee of the IEEE Industry Applications Society, 2001-2003

11.          Member of Technical Committee of the 5th International Power Electronics and Motion Control Conference (IPEMC2006), Shanghai, China, August 2006.

12.          Member of Steering Committee of IEEE-IEMDC Conference, 2003-2005.

13.          Member of the International Steering Committee, The Eighth International Conference on Electrical Machines and Systems (ICEMS’2005), Sep. 27-29, 2005, Nanjing, China.

14.          Member of the Technical Program Committee of the 4th International Power Electronics and Motion Control Conference, August 14-16, 2004, Xi’an, China.

15.          Special Session Chair, 4th International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED’03), Atlanta, GA, August 24-26, 2003.

16.          Member of the IEEE-IEMDC’03 Steering Committee, Madison, WI.

17.          Member of the Technical Program Committee, IAS’02, Pittsburgh, PA.

18.          Member of IEEE-IAS’02 Technical Program Committee

19.          Member of IEEE-APEC’02 Program Committee.

20.          Member of Industrial Drives Committee of the IEEE Industry Applications Society

21.          Member of the IEEE-IEMDC’01 Organizing Committee.

22.          Secretary of Induction Machine Subcommittee of Electric Machinery Committee of IEEE Power Engineering Society.

23.          Member of IEEE-APEC’01 Program Committee.

24.          Chairman of Standard Subcommittee of Electric Machines Committee of the IEEE Industry Application Society.

25.          Member of Induction Machinery Subcommittee of Electric Machinery Committee of IEEE Power Engineering Society.

26.          Member of IEEE-APEC’00 Program Committee.

27.          Member of the Technical Program Committee of the ICPE’98, Seoul, Korea, Oct. 26-31.

28.          Member of IEEE-APEC’99 Program Committee.

29.          Member of IEEE-APEC’97 Program Committee.

30.          Member of the International Steering Committee of the 1997 IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives, Carry-le-Rouet, France.

31.          Senior Member of IEEE, 1996-2008.

32.          Member of Sigma Xi, the Scientific Research Society.

33.          Member of Phi Beta Delta Honor Society for International Scholars.

34.          Listed in the 2000 Outstanding Scientist of the 20th Century.

Back to top

BACK TO DIRECTORY

 

http://ee.tamu.edu/People/bios/pics/toliyat/email25.gif